Alex <[EMAIL PROTECTED]> writes: Sorry, I forgot answering this email, thanks for the reminder.
> Marco Gerards wrote: > >>Can you show us the output of the following commands? : >> >>cat /etc/ttys >> >> > tty1 "/libexec/getty 38400" hurd on secure trusted > console > tty2 "/libexec/getty 38400" hurd on secure trusted > console > tty3 "/libexec/getty 38400" hurd on secure trusted > console > tty4 "/libexec/getty 38400" hurd on secure trusted > console > tty5 "/libexec/getty 38400" hurd on secure trusted > console > tty6 "/libexec/getty 38400" hurd on secure trusted > console Are the lines wrapped like this or only because your mail client wrapped them? >>showtrans /dev/vcs >> >> > /hurd/console Right. >>showtrans /dev/tty[123456] >> >> > showtrans /dev/tty1 : > /hurd/term /dev/tty1 hurdio /dev/vcs/1/console > > showtrans /dev/tty2 : > /hurd/term /dev/tty2 hurdio /dev/vcs/2/console > ... IIRC this is correct. >>showtrans /hurd/console >> >> > nothing !?! That's right. For my feeling everything is correct. I assume you used the newest Hurd package and rebooted the system after configuring the console server. IIRC you said both the vga and ncursesw consoles did not work. In that case I guess something is wrong with the console server or something around there. You could have a look at the PIDs of the servers and see if they don't change (=die). Can you access the console server using ls? For example: ls /dev/vcs/1 Does that show all nodes (console, display, input)? -- Marco _______________________________________________ Help-hurd mailing list [EMAIL PROTECTED] http://lists.gnu.org/mailman/listinfo/help-hurd
