Hrm ... an interesting thought ...

If I recall the construction of Danger-style hinges, there is a small
sleeve area, in the hinge itself.  If your measurements are particularly
accurate, and you have the ability to do so, drive some rebar that will
fit into those sleeves straight down into the ground the appropriate
distance and a touch more (I don't remember what that is for Burning
Man) so that they are at least half the board-height above the ground.
When you slide your hinges over them it adds to the ability of your
hexayurt not moving about, with the other tape-lines staked down, to
keep it from lifting straight up, you might be much less airborn than a
kite.  Measure carefully, though, because otherwise the stress of the
differences will create moop.

Percy

On Fri, 2012-08-17 at 15:13 -0700, Nocluewellmaybe wrote:
> I plan to use 1in for the roof and 1.5 for the walls, starting
> tonight.
>  
> But my biggest worry is whats the best way to ancor a yurt, the halo
> or the extra tape methods? Im going to try and get in the shadow of an
> RV or something else thats big if I can. But how many rebar points?
> (also been reading that 24in of rebar might not be enough) I was
> thinking of doing 6 total with the halo rope. 
>  
> I know last min questions but with all Im seeing out there this year
> Im wondering if I should have just gone with a costco kite and a tend
> inside. Would have cost the same (if not cheaper). I dont want get out
> there and have my structure gone within a day.
> -- 
> You received this message because you are subscribed to the Google
> Groups "hexayurt" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/hexayurt/-/yqz97mOMYFcJ.
> To post to this group, send email to hexayurt@googlegroups.com.
> To unsubscribe from this group, send email to hexayurt
> +unsubscr...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/hexayurt?hl=en.



-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To post to this group, send email to hexayurt@googlegroups.com.
To unsubscribe from this group, send email to 
hexayurt+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/hexayurt?hl=en.

Reply via email to