At the risk of over-flogging the point, I'd just like to point out that the bevelled edges of a standard H12 yurt run almost 200 feet. Setting aside the advantages of straightness and consistency, a table saw is going to make those cuts something like four or five times faster than doing it by hand.
I'm just saying'. Steve On Aug 9, 2013, at 8:40 AM, "Bill Wiltschko" <b...@wiltschko.org> wrote: > There is no substitute for a table saw for cutting panels. You will get much > straighter cut lines and a consistent beveling angle. > > > Bill > > > -------- Original Message -------- > Subject: [hexayurt] Hexayurt cutting help > From: Lee <leemorefeder...@gmail.com> > Date: Thu, August 08, 2013 6:42 pm > To: hexayurt@googlegroups.com > > Hi, > > I'm building my first hexayurt this year and am plan on using 1.5 to 2 inch > panels. What tools should I use to cut something that thick? Also, I read for > the 1 inch panels they recommend using 3 inch aluminum tape for the edges. > How thick of tape would I need for something thicker? > > Thanks for your help. > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/groups/opt_out. > > > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/groups/opt_out.
