thanks for clarifications. 

> On Apr 30, 2015, at 10:40 PM, dylan toymaker <dylan.toyma...@gmail.com> wrote:
> 
> Hi Hal, 
> 
> The floor of your hexayurt will be 6 Equilateral triangles with and 8' edge.  
>  they are each made from a sheet of plywood measured one point to the 
> opposite long side length of 8'. this gives 2 8'x4'x6.93' triangle and a 
> small rectangular off-cut.  
> 
> My crew built a sip-yurt and documented here:
> http://dylantoymaker.net/toybox/hexayurt/ 
> <http://dylantoymaker.net/toybox/hexayurt/>
> 
> floor:
> http://dylantoymaker.net/toybox/2012/12/27/portable-hexayurt-base/ 
> <http://dylantoymaker.net/toybox/2012/12/27/portable-hexayurt-base/>
> 
> 
> the biggest challenge to making an easy to assemble sip yurt is the corners.  
> either you bevel or you make corner parallelograms.  make a really good 3d 
> model first.  we wanted a full foam seal all the way around, so no internal 
> lumber in the SIP to create thermal bridging.  There are so many things to 
> balance, but if I had the space, I would use a thicker SIP with wood at the 
> edges to make bevelling easier and the corner connections stronger.  
> 
> our floors in this build are also SIPs - but they need a frame support 
> because SIPs are not typically structural on their sides. 
> 
> 
> good luck on your design plan!
> 
> dylan
> 
> 
> On Tuesday, 28 April 2015 13:43:53 UTC-6, Hal M wrote:
> On the playa, the playa is the floor, atop which goes a heavy duty tarp. 
> 
> Do NOT use these panels as flooring. Your first step onto one of them will be 
> the ruin of that panel. 
> 
> Alt would be plywood. 
> 
> 
> > On Apr 28, 2015, at 12:26 PM, RichShumaker <richsh...@ <>gmail.com 
> > <http://gmail.com/>> wrote: 
> > 
> > I know the walls and ceiling methods using 4' by 8' panels. 
> > What would the floor be or how would the floor be done using 4' by 8' 
> > panels? 
> > 
> > I would love a SIP system for the entire structure from the floor to the 
> > roof. 
> > Would need to know the best footers as well.  I was thinking corner footers 
> > with a center footer that is larger. 
> > 
> > Also for permanent install it would be cool to extend the roof on one wall 
> > to create an airlock entrance / porch for shoes and jackets. 
> > You could mirror this idea on the other side of the hex for a small 
> > bathroom as well. 
> > For both of these I would be using an 8 foot wall not 4 foot.  Keeping the 
> > slope the same I think it falls from 8 foot to 6 foot over 4 feet but my 
> > math may be wrong and so the roof may not match the slope if done this way, 
> > which is fine by me unless I build in heavy snow country. 
> > 
> > Thanks everyone for your help. 
> > 
> > Rich Shumaker 
> > 
> > -- 
> > You received this message because you are subscribed to the Google Groups 
> > "hexayurt" group. 
> > To unsubscribe from this group and stop receiving emails from it, send an 
> > email to hexayurt+u...@ <>googlegroups.com <http://googlegroups.com/>. 
> > To post to this group, send email to hexa...@ <>googlegroups.com 
> > <http://googlegroups.com/>. 
> > Visit this group at http://groups.google.com/group/hexayurt 
> > <http://groups.google.com/group/hexayurt>. 
> > For more options, visit https://groups.google.com/d/optout 
> > <https://groups.google.com/d/optout>. 
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "hexayurt" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to hexayurt+unsubscr...@googlegroups.com 
> <mailto:hexayurt+unsubscr...@googlegroups.com>.
> To post to this group, send email to hexayurt@googlegroups.com 
> <mailto:hexayurt@googlegroups.com>.
> Visit this group at http://groups.google.com/group/hexayurt 
> <http://groups.google.com/group/hexayurt>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.

-- 
You received this message because you are subscribed to the Google Groups 
"hexayurt" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to hexayurt+unsubscr...@googlegroups.com.
To post to this group, send email to hexayurt@googlegroups.com.
Visit this group at http://groups.google.com/group/hexayurt.
For more options, visit https://groups.google.com/d/optout.

Reply via email to