Making some progress covering the dome with poly iso board. This is a 2V dome, 17ft in diameter, which is what i typically build because the longest struts are 5ft long.
The insulation board usage was really efficient. I cut the board in thirds (lengthwise) and then cut each of those in diagonal. These pieces were taped together. To get the triangle to fit in the panel, i first cut about one inch off the top. Then i placed the panel in place on the dome to mark how much of the bottom i need to cut off. This varied from 1.75 inch to just 1 inch. The PVC pipe is one inch and insulation board is 1inch so it sits flush with the pipe. I make further adjustments by cutting off the bottom corners to get the bottom passwd the hubs. Then i tape it in place. I plan on making a more detailed video once I complete the dome, but here is a link to a youtube video of just the top as it was covered in the mean time. https://youtu.be/i2R_FUb4wMc Let me know what you think.... -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hexayurt/CALF4bX1WijuT5Ao89BMGRy4wfoKs2ZU3pY-NyVLhnQjZPbHxCQ%40mail.gmail.com.
