I think you need to try siting the dog closer to the wheel. This will put
the chien further over the main soundboard strut and significantly quieten
it. The mod can be done without major surgery by temporarily gluing a small
block of any hardwood to the soundboard at a distance from the left edge of
the chien bridge equal to the width of the existing slot. ( Double sided
tape works fine. This will give you an alternate chien position with the
right hand edge of the chien against the left edge of the bridge and the
left edge of the chien against the temporary block.
If still too loud, you can make a separate block with a slot in to accept
the chien and experiment with different positions.
It is actually useful to do this when siting the chien on a new build as you
can easily select the volume required before permanently gluing the bridge
in place.
Regards
Neil
----- Original Message -----
From: "Arle Lommel" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, September 12, 2007 7:16 PM
Subject: Re: [HG] Reducing the buzzing bridge
Hi Marc,
I tried that first thing. It had some impact, but not a whole lot. This
really is a very loud buzzing bridge compared to some.
Thanks,
Arle
On Sep 12, 2007, at 2:08 PM, marc reymen wrote:
Have you already tried to put a postich paper(small yellow self adhesive
reminder paper ) under the foot?
Marc
--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.485 / Virus Database:
269.13.22/1015 - Release Date: 18/09/2007 11:53
