Spot on!.

-----Original Message-----
From: histonet-boun...@lists.utsouthwestern.edu 
[mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of John Kiernan
Sent: 09 December 2009 17:10
To: Josephine Garcia
Cc: histonet@lists.utsouthwestern.edu
Subject: Re: [Histonet] Overstaining - Mayers H&E

This is a typical example of the informal "protocols" that get passed on from 
generation to generation of graduate students, postdocs and technicians in 
research labs at universities. The original was probably written by someone who 
knew how to do H&E staining, but on differently fixed tissues, and certainly on 
thinner sections. It apears to be for individual slides, because 10 seconds in 
each of the two 95% and 100% ethanols would be effective only with vigorous 
agitation in a large excess of fluid.
 
The tissue is almost unfixed, unless "Soak in 0.4% paraformaldehyde"  means 
leave it ovenight or longer in 4% formaldehyde. 
Researchers otherwise educated to the highest levels in such difficult 
disciplines as molecular biology and neuroscience regularly write phrases like 
"4% paraformaldehyde", thereby advertising their profound ignorance about 
fixation, which is the procedure that has the greatest effect on the appearance 
of anything dead that's examined with a microscope, especially if stains or 
histochemical methods are to be used. (I apologise for the length of the 
preceding sentence, but not for its punctuation, which is correct in British 
but not in American English usage. Check it out with Lynne Truss!)
 
The "sucrose cycle" step, with no times or instructions about floating and 
sinking, is probably local jargon from a lab where small animals' brains are 
minimally fixed and cryoprotected before cutting thick (50-100um) frozen 
sections, to be stained free-floating. That's not an H&E job! You are working 
with a thin skeletal muscle (rat's gastrocnemius).
 
If your Mayer's haemalum is a bought solution, it is intended for use in 
hospital labs, on paraffin sections about 5um thick. In a research setting you 
may need to make changes. Haemalum (Mayer's or anyone else's, correctly used) 
should stain cell nuclei blue and very little else. 
 
An important part of H&E staining is looking at the wet section with a 
microscope to check for adequate and selective nuclear coloration. In skeletal 
muscle the nuclei are small, so the haemalum-stained section is very pale blue 
to the unaided eye. With alcoholic eosin (as in your method) it's not so easy 
to control the staining with microscopic control, but it will probably be OK if 
the section is light pink. Some people like their eosin darker; it's largely a 
matter of taste unless you need to distinguish between different eosinophilic 
components on the basis of hue. 
 
John Kiernan
Anatomy, UWO
London, Canada
= = =
-----Original Message -----
From: Josephine Garcia <j...@u.washington.edu>
Date: Monday, December 7, 2009 11:43
Subject: [Histonet] Overstaining - Mayers H&E
To: histonet@lists.utsouthwestern.edu

> Hi all,
> 
> My (frozen-section, fixed) slides are coming out much too dark 
> (overstainedpurple) and I'm not sure why. They are 15-20 
> micrometer slices of rat
> gastrocnemius muscle. Can someone please look over our current 
> protocol and
> tell me what I'm doing wrong? Thanks! Here it is:
> 
> 1. Perfuse animal with 4% paraformaldehyde fixative.
> 2. Soak in 0.4% paraformaldehyde
> 3. Sucrose cycle (5% rinse, 10%, 20%, 30% soak)
> 4. Embed in OCT, Frozen sections (15-20 micrometers)
> 5. Let dry for 15-30 min
> 6. Stain as follows:
> 
> - Distilled H2O (quick dip)
> - Mayer's Hematoxylin - 1min (originally we were dipping for 5-
> 10 minutes. I
> slowly reduced the time to 2min, then 1min, then 30s... still 
> overstained!)- Running lukewarm tap water - drain and 
> continuously fill - 15min or until
> water runs clear
> - Distilled H2O (quick dip)
> - 80% EtOH - 1-2min
> - Eosin - 2 min
> - 95% EtOH I - 10sec
> - 95% EtOH  II - 10sec
> - 100% EtOH I - 10sec
> - 100% EtOH II - 10sec
> - Xylene I - 2min
> - Xylene II - 2min
> 
> 7. Coverslip and let dry overnight
> _______________________________________________
> Histonet mailing list
> Histonet@lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

Reply via email to