our cryostat is Minotome Plus Microtome Cryostat Cat. No. 2563-- For 120 VAC, 60Hz
--- On Sat, 3/20/10, Cheryl Cornett-Early <[email protected]> wrote: From: Cheryl Cornett-Early <[email protected]> Subject: Re: [Histonet] cryostat help please! To: "mohamed abd el razik" <[email protected]> Date: Saturday, March 20, 2010, 10:59 PM Hi Mohamed, I AM a Services guy and this problem sounds like a loss of refrigerant I come across this problem on older Cryostat's after they have been turned off regularly, What model of cryostat is it?. IT sounds like a CM1800 Riechet Jung or (Leica). Best regards Brian. My territory is the south east, GA, AL, TN, SC, NC, --- On Sat, 3/20/10, mohamed abd el razik <[email protected]> wrote: From: mohamed abd el razik <[email protected]> Subject: [Histonet] cryostat help please! To: [email protected] Date: Saturday, March 20, 2010, 9:30 AM hi all histoneters i have learned alot from your posts and i need any suggestion about a cryostat that was working perfectly until the power cable is pluged off accidently. then after about 2 days i put it again in the power and all is working with its motor sound but no refregration and room temp. not decrease under 20 degrees!!! i let it for aweek but no change! unfortene the technical service may take long time till it come to see the proplem as it is in a national university ( routine work) and i hope i could do that. any suggestion please? [email protected] _______________________________________________ Histonet mailing list [email protected] http://lists.utsouthwestern.edu/mailman/listinfo/histonet _______________________________________________ Histonet mailing list [email protected] http://lists.utsouthwestern.edu/mailman/listinfo/histonet
