Dear Histonetters,

I am currently reading up on proper use and maintenance of microscopes, and 
inevitably stumbled across Köhler's illumination. No one ever explained this to 
me, although I have a 'microscopy protocol' that comes close to properly 
explaining the correct setup.
So now that I know how to properly use a microscope fitted with such a system, 
there is still the issue of the coverslip/mounting medium which are considered 
the 'first lens'. I understand why there is a narrow tolerance for 
coverslip/mounting medium thickness to achieve optimal performance, but how do 
you control that thickness?

Currently, when I mount a slide, I keep it wetted with xylene, put a sufficient 
amount of mounting medium on the coverslip and mount in the usual 'rolling' 
motion. I then push on the coverslip to remove trapped bubbles (if any) and be 
sure to spread the glue under the entire coverslip.
However, how can one be sure about the thickness of the mounting medium layer? 
Using more/less glue and applying more/less pressure to the coverslip must 
surely influence this? Especially since we're talking microns.

Does anybody have any insights or tips, or I am just nitpicking and trying to 
achieve an impossible result? :)

Regards,
Jonathan

---
Jonathan Cremer
Laboratory Technician
Gastro-enterologie
KU Leuven, Belgium

_______________________________________________
Histonet mailing list
[email protected]
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

Reply via email to