I think I got it. Thank you for your explanation and most importantly, your time.
Michael Mihalik PathView Systems | cell: 214.733.7688 | 800.798.3540 | fax: 952.241.7369 -----Original Message----- From: Morken, Timothy [mailto:timothy.mor...@ucsfmedctr.org] Sent: Wednesday, November 05, 2014 1:32 PM To: 'Michael Mihalik'; 'Histonet' Subject: RE: [Histonet] Vantage in Grossing Room AB&T is the Copath tracking system but when a third party tracking system is used AB&T is used as the interface to the third party system. Tim Morken Supervisor, Histology, Electron Microscopy and Neuromuscular Special Studies UC San Francisco Medical Center San Francisco, CA CONFIDENTIALITY NOTICE: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential, proprietary, and/or privileged information protected by law. If you are not the intended recipient, you may not use, copy, or distribute this email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email and destroy all copies of the original message. -----Original Message----- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Michael Mihalik Sent: Wednesday, November 05, 2014 9:09 AM To: Morken, Timothy; 'Amber McKenzie'; 'Tom McNemar'; 'Histonet' Subject: RE: [Histonet] Vantage in Grossing Room So AB&T is the actual interface, not their barcode and tracking system? I understand about the ordering of blocks and stains, etc. Michael Mihalik PathView Systems | cell: 214.733.7688 | 800.798.3540 | fax: 952.241.7369 -----Original Message----- From: Morken, Timothy [mailto:timothy.mor...@ucsfmedctr.org] Sent: Wednesday, November 05, 2014 11:06 AM To: 'Michael Mihalik'; 'Amber McKenzie'; 'Tom McNemar'; 'Histonet' Subject: RE: [Histonet] Vantage in Grossing Room Cerner Copath AB&T will not interact in a bi-directional way with a third party tracking system (except to get "status" updates, ie when a block is scanned at embedding Vantage will send a message to Copath to update the block status). That is, you cannot enter a block or stain order in the third party system and have the data be written back to the Copath database. You must enter all in Copath and then the third party system picks it up from there. That is why Copath was telling Anita that they would need to use Copath alone at grossing (and accessioning, and all stain ordering). Also, You must buy and install AB&T to use any third party tracking system (AB&T is the HL7 interface). Tim Morken Supervisor, Histology, Electron Microscopy and Neuromuscular Special Studies UC San Francisco Medical Center San Francisco, CA CONFIDENTIALITY NOTICE: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential, proprietary, and/or privileged information protected by law. If you are not the intended recipient, you may not use, copy, or distribute this email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email and destroy all copies of the original message. -----Original Message----- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Michael Mihalik Sent: Wednesday, November 05, 2014 7:12 AM To: 'Amber McKenzie'; 'Tom McNemar'; Morken, Timothy; 'Histonet' Subject: RE: [Histonet] Vantage in Grossing Room Amber, at the risk of exposing my ignorance, doesnt AB&T and Vantage offer very similar functionality? I'm just curious why you would have both? As to your question, if you have some validation process occurring at grossing that requires information from your Copath system, then perhaps you might want to use Copath at grossing. For instance, if you scan requisitions or manual drawings or anything of that nature and you require those scanned images or other information to be verified at grossing, you might want to use Copath for grossing IF that information is not being sent across the interface from Copath to Vantage. I hope I'm making sense, but if not, please feel free to ask for clarification. Michael Mihalik PathView Systems | cell: 214.733.7688 | 800.798.3540 | fax: 952.241.7369 -----Original Message----- From: histonet-boun...@lists.utsouthwestern.edu [mailto:histonet-boun...@lists.utsouthwestern.edu] On Behalf Of Amber McKenzie Sent: Tuesday, November 04, 2014 9:49 AM To: Tom McNemar; 'Morken, Timothy'; Histonet Subject: [Histonet] Vantage in Grossing Room For those of you who have Vantage, in your grossing room do you have Vantage set up or your LIS system? I was thinking it should be vantage, but our Co-path person said we should have AB&T set up in the grossing room and let vantage start at embedding, microtomy and case assembly. What are your thoughts? Do you have a full computer, keyboard, and scanner in grossing? Thanks! _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet _______________________________________________ Histonet mailing list Histonet@lists.utsouthwestern.edu http://lists.utsouthwestern.edu/mailman/listinfo/histonet