is pEntity of type CBaseViewModel?

if not, try casting pEntity to CBaseViewModel

On Fri, Aug 19, 2011 at 12:55 PM, Ryan Sheffer <[email protected]> wrote:

> Thanks for the code, but unfortunately I need a way to get the attachment
> without using the beams attachment point stuff.
>
>
> On Thu, Aug 18, 2011 at 11:13 PM, Michael Kramer <
> [email protected]> wrote:
>
>> When I drew a beam for one of my weapons I used the following:
>>
>> pBeam->PointEntInit( endPos, this );
>> pBeam->SetEndAttachment( 1 );
>> pBeam->SetWidth( width / 4.0f );
>> pBeam->SetEndWidth( width );
>>
>> However this was serverside code, But I did then have it also spark on the
>> muzzle, so I did:
>> CBaseViewModel *pViewModel = pOwner->GetViewModel();
>> pViewModel->GetAttachment(LookupAttachment("muzzle"),origin,angles);
>> g_pEffects->Sparks(origin);
>>
>>
>> Below is the entire drawBeam function I used:
>>
>> CBasePlayer *pOwner = ToBasePlayer( GetOwner() );
>> CBaseViewModel *pViewModel = pOwner->GetViewModel();
>>
>>  if ( pOwner == NULL )
>> return;
>>
>> //Check to store off our view model index
>>  if ( pViewModel == NULL )
>> {
>> CBaseViewModel *vm = pOwner->GetViewModel();
>>  if ( vm )
>> {
>> m_hViewModel.Set( vm );
>>  }
>> }
>> #ifndef CLIENT_DLL
>> //Draw a tracer down the middle
>>  UTIL_Tracer( startPos, endPos, 0, TRACER_DONT_USE_ATTACHMENT, 6500,
>> true, "GaussTracer" );
>>
>> //Draw the main beam shaft
>>  CBeam *pBeam = CBeam::BeamCreate( GAUSS_BEAM_SPRITE, width );
>>
>> if ( useMuzzle )
>>  {
>> pBeam->PointEntInit( endPos, this );
>> pBeam->SetEndAttachment( 1 );
>>  pBeam->SetWidth( width / 4.0f );
>> pBeam->SetEndWidth( width );
>> }
>>
>> else
>> {
>> pBeam->SetStartPos( startPos );
>>  pBeam->SetEndPos( endPos );
>> pBeam->SetWidth( width );
>> pBeam->SetEndWidth( width / 4.0f );
>>  }
>>
>> pBeam->SetBrightness( 255 );
>> pBeam->SetColor( 255, 145+random->RandomInt( -16, 16 ), 0 );
>>  pBeam->RelinkBeam();
>> pBeam->LiveForTime( 5.1f );
>>
>>
>> On Thu, Aug 18, 2011 at 11:11 PM, Ryan Sheffer <[email protected]>wrote:
>>
>>> Hey coders!
>>>
>>> I came across a nasty little issue and I thought maybe somebody has come
>>> across this before.
>>> I am trying to create a client side beam from the muzzle of the players
>>> view model to where the bullet impacts, but I cannot get the attachment
>>> position for the muzzle on the view model.
>>>
>>> Here is the code I am using for getting the attachment:
>>>
>>>     int    attachment = pEntity->LookupAttachment( "muzzle" );
>>>     pEntity->GetAttachment( attachment, vecAttachment, angAttachment );
>>>
>>> pEntity is the view model.
>>> This is the same way I saw it done on the physcannons client side code.
>>> The position it gets appears to be somewhere close to the origin of the
>>> map but the coordinates are not exactly 0, 0, 0. One way to fix the position
>>> is to give myself a weapon_physcannon and then when I switch back to my gun
>>> the attachment position is where it should be, from the muzzle. I don't see
>>> anything special in the weapon_physcannon's code so I am baffled.
>>>
>>> Some things to note:
>>> - This is a client side entity, client side code
>>> - The attachment on the model looks fine in the model viewer
>>>
>>> So any help would be wonderful, I am just digging away at the debugging
>>> trying to find the issue but nothing sticks out, only the fact that having a
>>> physcannon at the same time fixes the problem.
>>>
>>> Here is the full code for the beam just in case:
>>>
>>> void C_WeaponSonicRifle::CreateShotBeam(void)
>>> {
>>>     CBasePlayer *pOwner = ToBasePlayer( GetOwner() );
>>>
>>>     if ( pOwner == NULL )
>>>         return;
>>>
>>>     BeamInfo_t beamInfo;
>>>     C_BaseAnimating *pEntity = NULL;
>>>     trace_t tr;
>>>
>>>     Vector    vecAttachment, vecCrosshair, vecDir;
>>>     QAngle    angAttachment;
>>>
>>>     if ( IsCarriedByLocalPlayer() && !::input->CAM_IsThirdPerson() )
>>>     {
>>>         pEntity = pOwner->GetViewModel();
>>>         vecDir = pOwner->GetAutoaimVector(AUTOAIM_5DEGREES);
>>>     }
>>>     else
>>>     {
>>>         pEntity = this;
>>>         vecDir = pOwner->GetAutoaimVector(AUTOAIM_5DEGREES);
>>>     }
>>>
>>>     pEntity->PushAllowBoneAccess( true, true, "sonic rifle" );
>>>
>>>     int    attachment = pEntity->LookupAttachment( "muzzle" );
>>>     pEntity->GetAttachment( attachment, vecAttachment, angAttachment );
>>>
>>>     pEntity->PopBoneAccess( "sonic rifle" );
>>>
>>>     vecCrosshair = pOwner->Weapon_ShootPosition();
>>>     UTIL_TraceLine(vecCrosshair, vecCrosshair + (vecDir *
>>> MAX_TRACE_LENGTH), MASK_SONICBEAMS, pOwner, COLLISION_GROUP_NONE, &tr);
>>>
>>>     beamInfo.m_pStartEnt = NULL;
>>>     beamInfo.m_pEndEnt = NULL;
>>>
>>>     //beamInfo.m_nType = TE_BEAMPOINTS;
>>>     beamInfo.m_vecStart = tr.endpos;
>>>     beamInfo.m_vecEnd = vecAttachment;
>>>
>>>     beamInfo.m_nStartAttachment = NULL;
>>>     beamInfo.m_nEndAttachment = NULL;
>>>
>>>     beamInfo.m_pszModelName = "sprites/laserbeam.vmt";
>>>     beamInfo.m_flHaloScale = 0.0f;
>>>     beamInfo.m_flLife = 2.5f;
>>>
>>>     beamInfo.m_flWidth = 3.0f;
>>>     beamInfo.m_flEndWidth = 3.0f;
>>>
>>>     beamInfo.m_flFadeLength = 0.0f;
>>>     beamInfo.m_flAmplitude = 0;
>>>
>>>     beamInfo.m_flBrightness = 255.0;
>>>
>>>     beamInfo.m_flSpeed = 1.0f;
>>>     beamInfo.m_nStartFrame = 0.0;
>>>     beamInfo.m_flFrameRate = 30.0;
>>>
>>>     beamInfo.m_flRed = 255;
>>>     beamInfo.m_flGreen = 255;
>>>     beamInfo.m_flBlue = 255;
>>>
>>>     beamInfo.m_nSegments = 4;
>>>     beamInfo.m_bRenderable = true;
>>>     beamInfo.m_nFlags = (FBEAM_SHADEIN | FBEAM_SHADEOUT | FBEAM_FADEOUT);
>>>
>>>     beams->CreateBeamPoints( beamInfo );
>>> }
>>>
>>> Thanks guys :)
>>>
>>> --
>>> ~Ryan ( skidz )
>>>
>>> _______________________________________________
>>> To unsubscribe, edit your list preferences, or view the list archives,
>>> please visit:
>>> http://list.valvesoftware.com/mailman/listinfo/hlcoders
>>>
>>>
>>>
>>
>> _______________________________________________
>> To unsubscribe, edit your list preferences, or view the list archives,
>> please visit:
>> http://list.valvesoftware.com/mailman/listinfo/hlcoders
>>
>>
>>
>
>
> --
> ~Ryan ( skidz )
>
> _______________________________________________
> To unsubscribe, edit your list preferences, or view the list archives,
> please visit:
> http://list.valvesoftware.com/mailman/listinfo/hlcoders
>
>
>
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please 
visit:
http://list.valvesoftware.com/mailman/listinfo/hlcoders

Reply via email to