Sorry for the last message where the title was corrupted! I'was writing
from a Windoz machine! I promise to turn it off after finishing
installing my HLFS machine!
----
Good Morning every one,
I'm new to HLFS and after building the toolchain on a correctly built
LFS distribution using a 2.6.11.12 kernel, I'm expreiencing a test
failure with the mqueue8 rt test. I'm also using a user package method
that help a lot to get the correct logs and errors. But for this failure
no information is mentionned and the only thing is said is that the make
failed: .../rt/tst-mqueue8x.out ] Error 1.
I'm using the HLFS SVN-20050731.
Before compiling the glibc I applied all the patches mentionned on that
book including the fix_test-1 patch.
The LFS system that I'm building on has passed all the tested without
any problem and is quite stable.
Do I have to consider this problem as critical and rebuild the system
again although I did that twice and get the same problem?
My kernel configuration is quite simple, no special things are arround
even USB is not used.
Thanks for your help.
--
Omar Belakhdar
Kselnet
Lausanne
CH-1020 Switzerland
--
http://linuxfromscratch.org/mailman/listinfo/hlfs-dev
FAQ: http://www.linuxfromscratch.org/faq/
Unsubscribe: See the above information page
