Daniel sorry about that address not working I'll try a copy and paste again and if this doesn't work then I'll need to find out how. DC http://partsurfer.hp.com/cgi-bin/spi/main?targfrm=&sel_flg=partpic&pic_f lg=part&partnum=C6072-60179&psval=&wupart_flg=&model=DESIGNJ_5000_42IN&H P_model=C6090A&modname=DesignJet+5000+%2842-inch%29+%28C6090A%29&dealer_ id=&rightnav=search&cpric=australia&mod_flg=&stype=&hotspot=&whichpic=X& popup_flg=&picture=&template=main&uniqparts=&callingsite=
-----Original Message----- From: David Crossing [SMTP:[EMAIL PROTECTED] Sent: Friday, February 04, 2005 10:09 AM To: '[email protected]' Subject: RE: [HPDesignJet_Printers] HP DesignJet 5000 Sysetm Error Daniel, this is a drop detector error. Your drop detector is either blocked-with ink or faulty. Below is the response action out of the manual. You could try to clean it out if you were getting weird and intermittent errors for sometime - this would indicate that the d/d is not faulty just filling up with ink. However if it has suddenly thrown this error up the chances are more like the detector is faulty. I've pasted in HP's diagram of where the drop detector is located. It's on the right hand side of the plotter next to the print head cleaning station.To get at it you will have to select replace print heads - when the carriage has moved to the left side turn power off and you should be able to find the detector. If you intend to have a go at cleaning it out yourself take pecautions against getting ink on your skin, clothing and floor covering. David Canberra http://partsurfer.hp.com/cgi-bin/spi/main?targfrm=&sel_flg=partpic&pic_f lg=part&partnum=C6072-60179&psval=&wupart_flg=&model=DESIGNJ_5000_42IN&H P_model=C6090A&modname=DesignJet+5000+%2842-inch%29+%28C6090A%29&dealer_ id=&rightnav=search&cpric=australia&mod_flg=&stype=&hotspot=&whichpic=X& popup_flg=&picture=&template=main&uniqparts=&callingsite= Try the following: -Check that the Drop Detector Cable is NOT broken or damaged. -Check that the Drop Detector cable is correctly connected to the Service Station Cable. -Remove the Drop Detector and make sure that there are no obstacles inside which are blocking the sensor. -Replace the Drop Detector Assembly <../../sto4/sto41/stork_41_23.htm>. -If the System Error Code continues, replace the Main PCA <../../sto4/sto41/stork_41_28.htm>. WARNING: Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. -----Original Message----- From: Daniel [SMTP:[EMAIL PROTECTED] Sent: Friday, February 04, 2005 7:42 AM To: [email protected] Subject: [HPDesignJet_Printers] HP DesignJet 5000 Sysetm Error HP DesignJet 5000 has giving me the System Error "0c0030 00000001" Can anyone tell me what it is and how do I fix the error? I am also trying to clean the printer, any advices??? Thanks, Daniel M. Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
