Set LogLevel to debug in /etc/cupsd.conf (or the equivalent cups config file), restart cups (/etc/init.d/cups restart) Print the test page again and check the cups log file (/var/log/cups/error_log) Also, check your printer configuration page, perhaps you have it set to grayscale with black cartridge and black cartridge is empty or close to it? Raghu
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zaki Sent: Thursday, November 02, 2006 12:21 PM To: hplip-help@lists.sourceforge.net Subject: [Hplip-help] HP PSC 1410 Test page print problem Hi there, I've searched around for my problem, the closest I've found is a post by Jyri Turkia on 2006-07-10 23:18:20 , titled "HP PSC 1410 won't print". Similar problem, I've had setup the print numerously, and this last time, I am very sure I got the installation right. hp-setup ran fine, hp-toolbox shows the info about the printer BUT the test page just wouldn't print. KDE shows vaguely 'Error', with job-state='0x6'. Possibilites: 1. It is shown in toolbox, Code: 1501 black print cartridge is low on ink. Still, shouldn't still print? (just assuming) 2. :) I just don't know. My log for /var/log/messages when I print is empty. My system is a converted knoppix to debian. Thanks. The output: [EMAIL PROTECTED] hp-check HP Linux Imaging and Printing System (ver. 1.6.10) Dependency/Version Check Utility ver. 4.0 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. --------------- | SYSTEM INFO | --------------- Basic system info (uname -a): --> Linux Knoppix 2.6.17 #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006 i686 GNU/Linux Detected distro (/etc/issue): --> debian 0.0 Detected distro (lsb_release): --> Debian testing (etch) Currently installed version... --> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=0 (dynamic IP port) port=2208 (IANA IP port) [hpssd] # port=0 (dynamic IP port) port=2207 (IANA IP port) [hplip] version=1.6.10 jdprobe=0 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP doc=/usr/share/doc/hplip-1.6.10 # Following values are determined at configure time and cannot be changed. [configure] network-build=1 pp-build=1 gui-build=1 scanner-build=1 fax-build=1 internal-tag=1.6.10.11 HPLIP running? --> Yes, HPLIP is running (OK). HPOJ running? --> No, HPOJ is not running (OK). Checking Python version... --> OK, version 2.4.4 installed ---------------- | DEPENDENCIES | ---------------- Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic library)'... --> OK, found. Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'... --> OK, found. Checking for dependency 'sane (SANE - Scanning library)'... --> OK, found. Checking for dependency 'gs (GhostScript - PostScript and PDF language interpreter and previewer)'... --> OK, found. Checking for dependency 'libjpeg (libjpeg - JPEG library)'... --> OK, found. Checking for dependency 'libpthread (libpthread - POSIX threads library)'... --> OK, found. Checking for dependency 'make (make - GNU make utility to maintain groups of programs)'... --> OK, found. Checking for dependency 'python-devel (python-devel - Python development files)'... --> OK, found. Checking for dependency 'reportlab (Reportlab - PDF library for Python)'... error: Not found! This is an OPTIONAL dependency. Checking for dependency 'pyqt (PyQt - Qt interface for Python)'... --> OK, found. Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System development files)'... --> OK, found. Checking for dependency 'ppdev (ppdev - Parallel port support kernel module.)'... --> OK, found. Checking for dependency 'libusb (libusb - USB library)'... --> OK, found. Checking for dependency 'scanimage (scanimage - Shell scanning program)'... --> OK, found. Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)'... --> OK, found. Checking for dependency 'python2x (Python 2.2 or greater - Python programming language)'... --> OK, found. Checking for dependency 'lsb (LSB - Linux Standard Base support)'... --> OK, found. Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'... --> OK, found. Checking for dependency 'cups (cups - Common Unix Printing System)'... --> OK, found. Checking for dependency 'python23 (Python 2.3 or greater - Required for fax functionality)'... --> OK, found. ---------------------- | INSTALLED PRINTERS | ---------------------- PSC_1400 -------- Device URI: hp:/usb/PSC_1400_series?serial=MY5BGCC1NJ04BM Installed in HPLIP? Yes PPD: /etc/cups/ppd/PSC_1400.ppd PPD Description: HP PSC 1400 Foomatic/hpijs (recommended) Printer status: printer PSC_1400 is idle. enabled since Thu Nov 2 18:44:32 2006 ready to print ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in /etc/sane.d/dll.conf'... --> OK, found. SANE backend 'hpaio' is not properly set up. Checking output of 'scanimage -L'... device `hpaio:/usb/PSC_1400_series?serial=MY5BGCC1NJ04BM' is a hp PSC_1400_series multi-function peripheral --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... --> OK, found. Checking 'pcardext' Photocard extension... --> OK, found. %d errors were detected. Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html ------------------------------------------------------------------------ - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
