I've attached as plain text the output of hp-check.
It seems that the kernel module ppdev is missing, but it wasn't
called as a required dependency by yum, the package manager.
My OJ1150Pro really prints (on the parallel port), how may this
cause trouble? Am I supposed to (compile it and) load it as a
separate kernel module?
I've got an ASUS A7V600 motherboard and I never changed the default
configuration for the parallel port, and it always worked under Linux.
There are apparently no configuration parameters for the LPT, except for
the deactivating option.
Feel free to ask me all the specific technical stuff you need.
Thanks,
Claudio A. Andreoni
> Would you happen to know how your BIOS is configured for your par part?
>
> You may want to reply to the list. I'm actually going on vacation and
> my internet access may be iffy. I may need to try and reproduce this
> on a like unit when I get back.
>
> Can you run hp-check and post that as well?
>
> A
>
> On 12/18/06, Claudio Alberto Andreoni <[EMAIL PROTECTED]> wrote:
> > Ok sorry I didn't found them before (while running tail):
> Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675] error: Unable to
> communicate with device: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
> Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675]: warning: Device not
> found
> Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675] error: Unable to
> communicate with device: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
> Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675]: warning: Device not
> found
> Dec 18 18:52:56 cloudguitar xsane: unable to fill data buffer: size=18411:
> prnt/hpijs/hplip_api.c 450
> Dec 18 18:53:26 cloudguitar hpiod: ParDevice::wait_status timeout status=7e
> mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118
> Dec 18 18:53:27 cloudguitar hpiod: ParDevice::wait_status timeout status=de
> mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118
> Dec 18 18:53:58 cloudguitar last message repeated 31 times
> Dec 18 18:54:12 cloudguitar last message repeated 14 times
> Dec 18 18:54:12 cloudguitar hpiod: unable to read MlcReverseData header:
> Success hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0 io/hpiod/mlc.cpp 500
>
> Regards,
> Claudio A.
>
> > scanimage -L:
> > [EMAIL PROTECTED] cloudguitar]# scanimage -L
> > device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp HP
> > OFFICEJET PRO 1150C multi-function peripheral
> >
> > tail -f /var/log/messages:
> > [EMAIL PROTECTED] cloudguitar]# tail -f /var/log/messages
> > Dec 18 18:21:03 cloudguitar gconfd (cloudguitar-3549): Received signal 15,
> > shutting down cleanly Dec 18 18:21:04 cloudguitar gconfd
> > (cloudguitar-3549): Exiting
> > Dec 18 18:21:06 cloudguitar kernel: agpgart: Found an AGP 3.5 compliant
> > device at 0000:00:00.0. Dec 18 18:21:06 cloudguitar kernel: agpgart:
> > Putting AGP V3 device at 0000:00:00.0 into 8x mode Dec 18 18:21:06
> > cloudguitar kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x
> > mode Dec 18 18:21:24 cloudguitar gdm[2442]: Couldn't authenticate user
> > Dec 18 18:26:50 cloudguitar gconfd (cloudguitar-6326): starting (version
> > 2.14.0), pid 6326 user 'cloudguitar' Dec 18 18:26:51 cloudguitar gconfd
> > (cloudguitar-6326): Resolved address
> > "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration
> > source at position 0 Dec 18 18:26:51 cloudguitar gconfd (cloudguitar-6326):
> > Resolved address "xml:readwrite:/home/cloudguitar/.gconf" to a writable
> > configuration source at position 1 Dec 18 18:26:51 cloudguitar gconfd
> > (cloudguitar-6326): Resolved address
> > "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration
> > source at position 2
> >
> >
> > Is this enough?
> > Thanks,
> > Claudio A.
>
>
> On Monday 18 December 2006 18:40, you wrote:
> > Can you run scanimage -L and post the output?
> >
> > Also run:
> >
> > tail -f /var/log/messages
> >
> > then try and scan and post any errors from the /var/log/messages.
> >
> > Aaron
> >
> > On 12/18/06, Claudio Alberto Andreoni <[EMAIL PROTECTED]> wrote:
> > > Hello,
> > > I am using a HP OfficeJet Pro 1150C on a Fedora Core 6 Zen.
> > > While it is possible to me to print, if I try to scan, both the device
> > > and the
> > > involved application (xsane or kooka) halt. If I do kill xsane, the
> > > printer comes
> > > back in the "1 Copy / 100%"-mode that is the default idle message on the
> > > screen of the printer, but I can't get no scanning at all.
> > > It seems a little bug or misconfiguration but it causes me a lot of
> > > trouble.
> > > And using the old HPOJ (on my former Fedora Core 4), everything is fine.
> > > I would accept hints and I thank everybody in advance.
> > >
> > > Regards,
> > > Claudio A.
> > >
> > > -------------------------------------------------------------------------
> > > Take Surveys. Earn Cash. Influence the Future of IT
> > > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > > your
> > > opinions on IT & business topics through brief surveys - and earn cash
> > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > _______________________________________________
> > > HPLIP-Help mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >
> >
> >
>
[EMAIL PROTECTED] ~]$ hp-check
HP Linux Imaging and Printing System (ver. 1.6.10)
Dependency/Version Check Utility ver. 4.0
Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
---------------
| SYSTEM INFO |
---------------
Basic system info (uname -a):
--> Linux cloudguitar.caa 2.6.18-1.2868.fc6 #1 SMP Fri Dec 15 17:32:54 EST
2006 i686 athlon i386 GNU/Linux
Detected distro (/etc/issue):
--> fedora 6.0
Detected distro (lsb_release):
--> FedoraCore 6 (Zod)
Currently installed version...
--> OK, HPLIP 1.6.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf
[hpiod]
# port=0 (dynamic IP port)
port=2208
[hpssd]
# port=0 (dynamic IP port)
port=2207
[hplip]
version=1.6.10
jdprobe=0
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/foomatic/db/source/PPD/HP
doc=/usr/share/doc/hplip-1.6.10
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=1
gui-build=1
scanner-build=1
fax-build=1
internal-tag=1.6.10.11
HPLIP running?
\ 6071 ? Ss 0:00 /usr/sbin/pppd pty /usr/sbin/pppoe -p
/var/run/pppoe-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 ipparam tele2
linkname ppp0 noipdefault noauth default-asyncmap defaultroute hide-password
nodetach usepeerdns mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate
nopcomp novj novjccomp user [EMAIL PROTECTED] lcp-echo-interval 20
lcp-echo-failure 3
\ 6071 ? Ss 0:00 /usr/sbin/pppd pty /usr/sbin/pppoe -p
/var/run/pppoe-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 ipparam tele2
linkname ppp0 noipdefault noauth default-asyncmap defaultroute hide-password
nodetach usepeerdns mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate
nopcomp novj novjccomp user [EMAIL PROTECTED] lcp-echo-interval 20
lcp-echo-failure 3
--> Yes, HPLIP is running (OK).
HPOJ running?
- 6071 ? Ss 0:00 /usr/sbin/pppd pty /usr/sbin/pppoe -p
/var/run/pppoe-adsl.pid.pppoe -I eth0 -T 80 -U -m 1412 ipparam tele2
linkname ppp0 noipdefault noauth default-asyncmap defaultroute hide-password
nodetach usepeerdns mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate
nopcomp novj novjccomp user [EMAIL PROTECTED] lcp-echo-interval 20
lcp-echo-failure 3
--> No, HPOJ is not running (OK).
Checking Python version...
--> OK, version 2.4.3 installed
----------------
| DEPENDENCIES |
----------------
Checking for dependency 'libcrypto (libcrypto - OpenSSL cryptographic
library)'...
--> OK, found.
Checking for dependency 'gcc (gcc - GNU Project C and C++ Compiler)'...
--> OK, found.
Checking for dependency 'sane (SANE - Scanning library)'...
--> OK, found.
Checking for dependency 'gs (GhostScript - PostScript and PDF language
interpreter and previewer)'...
--> OK, found.
Checking for dependency 'libjpeg (libjpeg - JPEG library)'...
--> OK, found.
Checking for dependency 'libpthread (libpthread - POSIX threads library)'...
--> OK, found.
Checking for dependency 'make (make - GNU make utility to maintain groups of
programs)'...
--> OK, found.
Checking for dependency 'python-devel (python-devel - Python development
files)'...
--> OK, found.
Checking for dependency 'reportlab (Reportlab - PDF library for Python)'...
error: Not found!
This is an OPTIONAL dependency.
Checking for dependency 'pyqt (PyQt - Qt interface for Python)'...
--> OK, found.
Checking for dependency 'cups-devel (cups-devel- Common Unix Printing System
development files)'...
--> OK, found.
Checking for dependency 'ppdev (ppdev - Parallel port support kernel
module.)'...
--> OK, found.
Checking for dependency 'libusb (libusb - USB library)'...
error: Not found!
error: This is a REQUIRED dependency.
Checking for dependency 'scanimage (scanimage - Shell scanning program)'...
--> OK, found.
Checking for dependency 'libnetsnmp-devel (libnetsnmp-devel - SNMP networking
library development files)'...
error: Not found!
error: This is a REQUIRED dependency.
Checking for dependency 'python2x (Python 2.2 or greater - Python programming
language)'...
--> OK, found.
Checking for dependency 'lsb (LSB - Linux Standard Base support)'...
--> OK, found.
Checking for dependency 'xsane (xsane - Graphical scanner frontend for SANE)'...
--> OK, found.
Checking for dependency 'cups (cups - Common Unix Printing System)'...
--> OK, found.
Checking for dependency 'python23 (Python 2.3 or greater - Required for fax
functionality)'...
--> OK, found.
----------------------
| INSTALLED PRINTERS |
----------------------
ojp
---
Device URI: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
Installed in HPLIP? Yes
PPD: /etc/cups/ppd/ojp.ppd
PPD Description: HP OfficeJet Pro 1150C Foomatic/hpijs (recommended)
Printer status:
printer ojp is idle. enabled since Mon 25 Dec 2006 03:57:55 PM CET
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in /etc/sane.d/dll.conf'...
--> OK, found. SANE backend 'hpaio' is not properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp
OFFICEJET_PRO_1150C multi-function peripheral
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
--> OK, found.
Checking 'pcardext' Photocard extension...
--> OK, found.
%d errors were detected.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
