If possible please install from the source at hplip.sf.net. There may be some errata with the gentoo ebuild, and it is not supported by this list.
Thanks. Aaron On 1/14/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > I'm using hplip for printing and scanning to/from my HP Photosmart C5180. > With hplip 1.6.10 I could share the scanner of the Photosmart over the > network (saned provided access ot the scanner and the hpaio-backend); > everything worked fine. After upgrading from 1.6.10 to 1.6.12 this setup > does not work any more. I can still scan locally on the server the printer > is connected to (scanimage -L shows me the printer/scanner). But saned does > not provide access to the scanner any more. > Here is the debug-output if saned: > > [saned] main: starting debug mode (level 8) > [saned] main: trying to get port for service `sane' (getservbyname) > [saned] main: port is 6566 > [saned] main: socket () > [saned] main: setsockopt () > [saned] main: bind () > [saned] main: listen () > [saned] main: waiting for control connection > [saned] saned from sane-backends 1.0.18 ready > [saned] check_host: access by remote host: 192.168.2.16 > [saned] check_host: remote host is not IN_LOOPBACK > [saned] check_host: local hostname: dk2 > [saned] check_host: local hostname (from DNS): dk2.home.local > [saned] check_host: local host address (from DNS): 192.168.2.13 > [saned] check_host: remote host doesn't have same addr as local > [saned] check_host: opening config file: /etc/hosts.equiv > [saned] check_host: can't open config file: /etc/hosts.equiv (No such file > or directory) > [saned] check_host: opening config file: saned.conf > [saned] check_host: config file line: `#' > [saned] check_host: config file line: `# saned.conf' > [saned] check_host: config file line: `#' > [saned] check_host: config file line: `# The contents of the saned.conf > file is a list of host names, IP' > [saned] check_host: config file line: `# addresses or IP subnets (CIDR > notation) that are permitted to use local' > [saned] check_host: config file line: `# SANE devices. IPv6 addresses must > be enclosed in brackets, and should' > [saned] check_host: config file line: `# always be specified in their > compressed form.' > [saned] check_host: config file line: `#' > [saned] check_host: config file line: `# The hostname matching is not > case-sensitive.' > [saned] check_host: config file line: `#' > [saned] check_host: config file line: `#scan-client.somedomain.firm' > [saned] check_host: config file line: `#192.168.0.1' > [saned] check_host: config file line: `#192.168.0.1/29' > [saned] check_host: config file line: `#[2001:7a8:185e::42:12]' > [saned] check_host: config file line: `#[2001:7a8:185e::42:12]/64' > [saned] check_host: config file line: `' > [saned] check_host: config file line: `+' > [saned] check_host: access accepted from any host (`+') > [saned] init: access granted > [saned] init: access granted to [EMAIL PROTECTED] > [saned] process_request: waiting for request > [saned] process_request: got request 1 > [saned] process_request: waiting for request > [saned] process_request: got request 10 > [saned] quit: exiting > > This shows that the client is able to connect to the sane-server, but it > cannot find any scanner (which worked before in hplip 1.6.10). > Btw, I compiled hplip from the official Gentoo-ebuild. > > Is there a way I can get scanning over the net to work again? > > Thanks, Dan > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > HPLIP-Help mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > -- I don't care, I'm still free. You can't take the sky from me. - "Firefly" ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/hplip-help
