hi,
sudo apt-get install build-essential
[EMAIL PROTECTED]:~$ sudo apt-get install build-essential
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo información de estado... Hecho
build-essential ya está en su versión más reciente.
Los siguientes paquetes fueron instalados automáticamente y ya no son
necesarios:
java-common unixodbc odbcinst1debian1 libltdl3
Use «apt-get autoremove» para desinstalarlos.
0 actualizados, 0 se instalarán, 0 para eliminar y 17 no actualizados.
I have the last version of build-essential
then, python ./check.py
[EMAIL PROTECTED]:~/hplip-1.7.4a$ python ./check.py
HP Linux Imaging and Printing System (ver. 1.7.3)
Dependency/Version Check Utility ver. 5.3
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux bel-desktop 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
GNU/Linux
Detected distro (/etc/issue):
ubuntu 7.04
Detected distro (lsb_release):
Ubuntu 7.04 (feisty)
Currently installed HPLIP version...
HPLIP 1.7.3 currently installed in '/usr/lib/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf
[hpiod]
# port=0 (dynamic IP port)
port=2208
[hpssd]
# port=0 (dynamic IP port)
port=2207
[hplip]
version=1.7.3
jdprobe=0
[dirs]
home=/usr/lib/hplip
run=/var/run/hplip
ppd=/usr/share/ppd
doc=/usr/share/doc/hplip-doc/HTML
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=1
pp-build=1
gui-build=1
scanner-build=1
fax-build=1
cups11-build=0
HPLIP running?
No, HPLIP is not running (OK).
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.1 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
OK, Version 4.5 installed
----------------
| DEPENDENCIES |
----------------
Checking for dependency libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency SANE - Scanning library...
OK, found.
Checking for dependency GhostScript - PostScript and PDF language
interpreter and previewer...
OK, found.
Checking for dependency libjpeg - JPEG library...
OK, found.
Checking for dependency libpthread - POSIX threads library...
OK, found.
Checking for dependency make - GNU make utility to maintain groups of
programs...
OK, found.
Checking for dependency python-devel - Python development files...
OK, found.
Checking for dependency Reportlab - PDF library for Python...
OK, found.
Checking for dependency PyQt - Qt interface for Python...
OK, found.
Checking for dependency cups-devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency libusb - USB library...
OK, found.
Checking for dependency scanimage - Shell scanning program...
OK, found.
Checking for dependency libnetsnmp-devel - SNMP networking library
development files...
OK, found.
Checking for dependency Python 2.2 or greater - Python programming
language...
OK, found.
Checking for dependency LSB - Linux Standard Base support...
OK, found.
Checking for dependency xsane - Graphical scanner frontend for SANE...
OK, found.
Checking for dependency cups - Common Unix Printing System...
OK, found.
Checking for dependency Python 2.3 or greater - Required for fax
functionality...
OK, found.
----------------------
| INSTALLED PRINTERS |
----------------------
warning: No queues found.
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
error: Not found. SANE backend 'hpaio' not properly setup (needs to be added
to /etc/sane.d/dll.conf).
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
error: Not found! Please reinstall HPLIP and check for the proper
installation of cupsext.
Checking 'pcardext' Photocard extension...
error: Not found! Please reinstall HPLIP and check for the proper
installation of pcardext.
3 errors were detected.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
now python ./install.py
[EMAIL PROTECTED]:~/hplip-1.7.4a$ python ./install.py
hplip-install_vie-25-may-2007_13:50:37.log
HP Linux Imaging and Printing System (ver. 1.7.4a)
HPLIP Installer ver. 1.0
Copyright (c) 2001-7 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Initializing...
note: Defaults for each question are maked with a '*'. Press <enter> to
accept the default.
INSTALLATION MODE
-----------------
Please choose the installation mode (a=automatic*, c=custom, q=quit) : a
INTRODUCTION
------------
This installer will install HPLIP version 1.7.4a on your computer.
Distro is Ubuntu 7.04
ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
-Exception 'Logger' object has no attribute '_log_file_f'
note: Password accepted.
INSTALLATION NOTES
------------------
Enable the universe/multiverse repositories. See:
https://help.ubuntu.com/community/Repositories/Ubuntu for more information.
Please read the installation notes and hit <enter> to continue
(<enter>=continue*, q=quit) :
\Exception 'Logger' object has no attribute '_log_file_f'
Running 'sudo dpkg --configure -a'
Please wait, this may take several minutes...
Running 'sudo apt-get install --yes --force-yes -f '
Please wait, this may take several minutes...
/Exception 'Logger' object has no attribute '_log_file_f'
Traceback (most recent call last):
File "./install.py", line 135, in <module>
text_install.start(auto)
File "/home/bel/hplip-1.7.4a/installer/text_install.py", line 598, in
start
status, output = run(cmd, True, password_func)
File "/home/bel/hplip-1.7.4a/installer/text_install.py", line 73, in run
child.close()
File "/home/bel/hplip-1.7.4a/base/pexpect.py", line 566, in close
if not self.terminate(force):
File "/home/bel/hplip-1.7.4a/base/pexpect.py", line 833, in terminate
self.kill(signal.SIGHUP)
File "/home/bel/hplip-1.7.4a/base/pexpect.py", line 951, in kill
os.kill(self.pid, sig)
OSError: [Errno 1] Operación no permitida
what can i do ?
2007/5/25, dwelch91 <[EMAIL PROTECTED]>:
You need to install "pthread". On Ubuntu, run:
$ sudo apt-get install build-essential
Have you tried running the installer and/or the check utility?
$ python ./check.py
or
$ python ./install.py
-Don
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
