Hi, I can scan from my OfficeJet G85 (and an OfficeJet K80) using hp-scan and scanimage from the command line and using xscanimage from within gimp when using a machine directly connected to the printer via usb.
I would like to be able to scan over a small home network from a second linux machine and a windows xp machine, but don't seem to be able to get this working (with the printer still connected via usb to the first linux machine). Note that I can print without problems over the same network. Is there something about the way hplip and/or hpaio functions that prevents network scanning from working? As far as I can tell, the following setup should work: 1. /etc/inetd.conf (on the machine connected to the printer) sane-port stream tcp nowait user.group /usr/sbin/saned saned 2. /etc/sane.d/saned.conf (on the machine connected to the printer) 192.168.1.* 3. /etc/sane.d/net.conf (on the remote machine) 192.168.1.100 [the ip address of the machine connected to the printer] I am using hplip-2.7.6, sane-frontends-1.0.14 and sane-backends-1.0.18 Thanks John ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
