Dear Friends, Printer is perfect, scanner is dead.
setup returns folloiwng: HP Linux Imaging and Printing System (ver. 2.7.10) Printer/Fax Setup Utility ver. 3.1 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. 0 Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed error: <b>No devices found.</b><p>Please make sure your printer is properly connected and powered-on. Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) TypeError: function takes exactly 6 arguments (5 given) Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) TypeError: function takes exactly 6 arguments (5 given) Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) TypeError: function takes exactly 6 arguments (5 given) Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) TypeError: function takes exactly 6 arguments (5 given) Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) TypeError: function takes exactly 6 arguments (5 given) Traceback (most recent call last): File "/usr/lib/hplip/ui/setupform.py", line 211, in showPage self.setupPrinter() File "/usr/lib/hplip/ui/setupform.py", line 726, in setupPrinter installed_print_devices = device.getSupportedCUPSDevices(['hp']) File "/usr/lib/hplip/base/device.py", line 298, in getSupportedCUPSDevices back_end, is_hp, bus, model, serial, dev_file, host, port = \ File "/usr/lib/hplip/base/device.py", line 364, in parseDeviceURI m = pat_deviceuri.match(device_uri) More imnportant: [EMAIL PROTECTED] ~ # hp-scan HP Linux Imaging and Printing System (ver. 2.7.10) Scan Utility ver. 0.5 Copyright (c) 2001-7 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. warning: No destinations specified. Adding 'file' destination by default. warning: File destination enabled with no output file specified. Setting output format to JPEG for color/lineart mode. warning: Defaulting to '/root/hpscan001.jpg'. error: Scanning disabled in build. Exiting Scanner found - found USB scanner (vendor=0x03f0 [HP], product=0x6611 [Photosmart C4380 series]) at libusb:005:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. Any ideas? Best, M TypeError: function takes exactly 6 arguments (5 given) ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help