I am really newbie with linux but would like a lot to make htdig running. I believe that there is something wrong with my CONFIG file because all the steps with installation seemed to go ok.
Here is the path for my htdig: /home/customers/tubenet/public_html/cgi/htdig-3.1.6 I have all my existing running (perl) scripts are here: /home/customers/tubenet/public_html/cgi/ What is the command to run rundig? I tried to type that name on command line and all I got was an "bash..." error msg. My site URL is: http://www.tubenet.org.uk Below please find my CONFIG and htdig.conf files: ## ## CONFIG ## ## This file is part of ht://Dig ## # # These variables are set by configure # # This specifies the root of the directory tree to be used by ht://Dig prefix= /home/customers/tubenet/public_html/cgi/htdig-3.1.6 # This specifies the root of the directory tree to be used for programs # installed by ht://Dig exec_prefix= ${prefix} # # Please modify the variables below to reflect your preferences. # # # DEST # # This specifies the root of the directory tree to be used by ht://Dig # DEST= $(prefix) # # BIN_DIR # Set this macro to where you want the binaries to be installed. # BIN_DIR= ${exec_prefix}/bin # # CONFIG_DIR # This is the directory that contains ht://Dig configuration files # CONFIG_DIR= ${prefix}/conf # # COMMON_DIR # This is the directory for files that can be shared between different # databases. # COMMON_DIR= ${prefix}/common # # DATABASE_DIR # The default directory where the search databases will reside. # DATABASE_DIR= ${prefix}/db # # DEFAULT_CONFIG_FILE # This macro defines where the various programs will look for a configuration # file. # DEFAULT_CONFIG_FILE= ${CONFIG_DIR}/htdig.conf # # CGIBIN_DIR # The directory where your HTTP server looks for CGI programs. This is where # htsearch will get installed. # CGIBIN_DIR= /home/customers/tubenet/public_html/cgi # # IMAGE_DIR # Define this to be a place that can be accessed by your web server. This is # where a couple of images will be placed. # IMAGE_DIR= /home/customers/tubenet/public_html/htdig # # IMAGE_URL_PREFIX # This is the URL to prefix the images placed in IMAGE_DIR. # IMAGE_URL_PREFIX= /htdig # # SEARCH_DIR # Set this to the absolute path where you want the sample search form to # be installed. # SEARCH_DIR= /home/customers/tubenet/public_html/htdocs/htdig # # SEARCH_FORM # Set this to the name you want to give to the search form. This form # will be located in the SEARCH_DIR directory. # SEARCH_FORM= search.html and here is my htdig.conf file: # # Example config file for ht://Dig. # # This configuration file is used by all the programs that make up ht://Dig. # Please refer to the attribute reference manual for more details on what # can be put into this file. (http://www.htdig.org/confindex.html) # Note that most attributes have very reasonable default values so you # really only have to add attributes here if you want to change the defaults. # # What follows are some of the common attributes you might want to change. # # # Specify where the database files need to go. Make sure that there is # plenty of free disk space available for the databases. They can get # pretty big. # database_dir: /home/customers/tubenet/public_html/cgi/htdig-3.1.6/db # # This specifies the URL where the robot (htdig) will start. You can specify # multiple URLs here. Just separate them by some whitespace. # The example here will cause the ht://Dig homepage and related pages to be # indexed. # You could also index all the URLs in a file like so: # start_url: `${common_dir}/start.url` # start_url: http://www.tubenet.org.uk/ # # This attribute limits the scope of the indexing process. The default is to # set it to the same as the start_url above. This way only pages that are on # the sites specified in the start_url attribute will be indexed and it will # reject any URLs that go outside of those sites. # # Keep in mind that the value for this attribute is just a list of string # patterns. As long as URLs contain at least one of the patterns it will be # seen as part of the scope of the index. # limit_urls_to: ${start_url} # # If there are particular pages that you definitely do NOT want to index, you # can use the exclude_urls attribute. The value is a list of string patterns. # If a URL matches any of the patterns, it will NOT be indexed. This is # useful to exclude things like virtual web trees or database accesses. By # default, all CGI URLs will be excluded. (Note that the /cgi-bin/ convention # may not work on your web server. Check the path prefix used on your web # server.) # exclude_urls: /cgi/ .cgi # # Since ht://Dig does not (and cannot) parse every document type, this # attribute is a list of strings (extensions) that will be ignored during # indexing. These are *only* checked at the end of a URL, whereas # exclude_url patterns are matched anywhere. # bad_extensions: .wav .gz .z .sit .au .zip .tar .hqx .exe .com .gif \ .jpg .jpeg .aiff .class .map .ram .tgz .bin .rpm .mpg .mov .avi .css .pl .cgi # # The string htdig will send in every request to identify the robot. Change # this to your email address. # maintainer: [EMAIL PROTECTED] # # The excerpts that are displayed in long results rely on stored information # in the index databases. The compiled default only stores 512 characters of # text from each document (this excludes any HTML markup...) If you plan on # using the excerpts you probably want to make this larger. The only concern # here is that more disk space is going to be needed to store the additional # information. Since disk space is cheap (! :-)) you might want to set this # to a value so that a large percentage of the documents that you are going # to be indexing are stored completely in the database. At SDSU we found # that by setting this value to about 50k the index would get 97% of all # documents completely and only 3% was cut off at 50k. You probably want to # experiment with this value. # Note that if you want to set this value low, you probably want to set the # excerpt_show_top attribute to false so that the top excerpt_length characters # of the document are always shown. # max_head_length: 100000 # # To limit network connections, ht://Dig will only pull up to a certain limit # of bytes. This prevents the indexing from dying because the server keeps # sending information. However, several FAQs happen because people have files # bigger than the default limit of 100KB. This sets the default a bit higher. # (see <http://www.htdig.org/FAQ.html> for more) # max_doc_size: 300000 # # Most people expect some sort of excerpt in results. By default, if the # search words aren't found in context in the stored excerpt, htsearch shows # the text defined in the no_excerpt_text attribute: # (None of the search words were found in the top of this document.) # This attribute instead will show the top of the excerpt. # no_excerpt_show_top: true # # Depending on your needs, you might want to enable some of the fuzzy search # algorithms. There are several to choose from and you can use them in any # combination you feel comfortable with. Each algorithm will get a weight # assigned to it so that in combinations of algorithms, certain algorithms get # preference over others. Note that the weights only affect the ranking of # the results, not the actual searching. # The available algorithms are: # accents # exact # endings # metaphone # prefix # soundex # substring # synonyms # By default only the "exact" algorithm is used with weight 1. # Note that if you are going to use the endings, metaphone, soundex, accents, # or synonyms algorithms, you will need to run htfuzzy to generate # the databases they use. # search_algorithm: exact:1 synonyms:0.5 endings:0.1 # # The following are the templates used in the builtin search results # The default is to use compiled versions of these files, which produces # slightly faster results. However, uncommenting these lines makes it # very easy to change the format of search results. # See <http://www.htdig.org/hts_templates.html> for more details. # # template_map: Long long ${common_dir}/long.html \ # Short short ${common_dir}/short.html # template_name: long # # The following are used to change the text for the page index. # The defaults are just boring text numbers. These images spice # up the result pages quite a bit. (Feel free to do whatever, though) # next_page_text: <img src="@IMAGEDIR@/buttonr.gif" border="0" align="middle" width="30" height="30" alt="next"> no_next_page_text: prev_page_text: <img src="@IMAGEDIR@/buttonl.gif" border="0" align="middle" width="30" height="30" alt="prev"> no_prev_page_text: page_number_text: '<img src="@IMAGEDIR@/button1.gif" border="0" align="middle" width="30" height="30" alt="1">' \ '<img src="@IMAGEDIR@/button2.gif" border="0" align="middle" width="30" height="30" alt="2">' \ '<img src="@IMAGEDIR@/button3.gif" border="0" align="middle" width="30" height="30" alt="3">' \ '<img src="@IMAGEDIR@/button4.gif" border="0" align="middle" width="30" height="30" alt="4">' \ '<img src="@IMAGEDIR@/button5.gif" border="0" align="middle" width="30" height="30" alt="5">' \ '<img src="@IMAGEDIR@/button6.gif" border="0" align="middle" width="30" height="30" alt="6">' \ '<img src="@IMAGEDIR@/button7.gif" border="0" align="middle" width="30" height="30" alt="7">' \ '<img src="@IMAGEDIR@/button8.gif" border="0" align="middle" width="30" height="30" alt="8">' \ '<img src="@IMAGEDIR@/button9.gif" border="0" align="middle" width="30" height="30" alt="9">' \ '<img src="@IMAGEDIR@/button10.gif" border="0" align="middle" width="30" height="30" alt="10">' # # To make the current page stand out, we will put a border around the # image for that page. # no_page_number_text: '<img src="@IMAGEDIR@/button1.gif" border="2" align="middle" width="30" height="30" alt="1">' \ '<img src="@IMAGEDIR@/button2.gif" border="2" align="middle" width="30" height="30" alt="2">' \ '<img src="@IMAGEDIR@/button3.gif" border="2" align="middle" width="30" height="30" alt="3">' \ '<img src="@IMAGEDIR@/button4.gif" border="2" align="middle" width="30" height="30" alt="4">' \ '<img src="@IMAGEDIR@/button5.gif" border="2" align="middle" width="30" height="30" alt="5">' \ '<img src="@IMAGEDIR@/button6.gif" border="2" align="middle" width="30" height="30" alt="6">' \ '<img src="@IMAGEDIR@/button7.gif" border="2" align="middle" width="30" height="30" alt="7">' \ '<img src="@IMAGEDIR@/button8.gif" border="2" align="middle" width="30" height="30" alt="8">' \ '<img src="@IMAGEDIR@/button9.gif" border="2" align="middle" width="30" height="30" alt="9">' \ '<img src="@IMAGEDIR@/button10.gif" border="2" align="middle" width="30" height="30" alt="10">' # local variables: # mode: text # eval: (if (eq window-system 'x) (progn (setq font-lock-keywords (list '("^#.*" . font-lock-keyword-face) '("^[a-zA-Z][^ :]+" . font-lock-function-name-face) '("[+$]*:" . font-lock-comment-face) )) (font-lock-mode))) # end: _______________________________________________ htdig-general mailing list <[EMAIL PROTECTED]> To unsubscribe, send a message to <[EMAIL PROTECTED]> with a subject of unsubscribe FAQ: http://htdig.sourceforge.net/FAQ.html
