According to olinux: > There's a file called db.wordlist in the htdig/db/ > directory > > mine is located at /opt/www/htdig/db/db.wordlist > > Josh
Only the 3.1.x series, or older, produces a db.wordlist. If you're using 3.2.0b5, there is no ASCII word list by default. However, you can produce a db.worddump file in 3.2.0b5 by running the "htdump" command. See http://www.htdig.org/dev/htdig-3.2/htdump.html > --- Maurizio <[EMAIL PROTECTED]> wrote: > > Hi all, > > since I couldn't find an italian bad_words file on > > the Net I decided to create > > one on my own. In order to do that I wrote down a > > simple list of step to be > > taken: > > 1) run htdig to index my site > > 2) look at db.words.db to see which words have been > > gathered > > 3) from step 2) create a minimal bad_words file > > 4) repeat step 2) and step 3) until satisfied > > > > I ran step 1) with success but I cannot go any > > further because the db file is > > not an ascii file. So the question is: how can I > > have a list of the word > > indexed by ht://Dig? -- Gilles R. Detillieux E-mail: <[EMAIL PROTECTED]> Spinal Cord Research Centre WWW: http://www.scrc.umanitoba.ca/ Dept. Physiology, U. of Manitoba Winnipeg, MB R3E 3J7 (Canada) ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ ht://Dig general mailing list: <[EMAIL PROTECTED]> ht://Dig FAQ: http://htdig.sourceforge.net/FAQ.html List information (subscribe/unsubscribe, etc.) https://lists.sourceforge.net/lists/listinfo/htdig-general
