ok, clean build of hugin/autopano/libpano13 from cvs, hugin is 0.8.0.3571, system is:
linux-us74:/usr/local/hugin # cat /etc/SuSE-release openSUSE 11.1 (i586) VERSION = 11.1 linux-us74:/usr/local/hugin # uname -a Linux linux-us74 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686 i686 i386 GNU/Linux autopano works fine with the tutorial files and makes a useable pto file mich...@linux-us74:~/Desktop/tutorial> autopano-c-complete.sh -o tutorial.pto *.jpg uname: Linux Remaining arguments (8): --> `p986.jpg' --> `p987.jpg' --> `p988.jpg' --> `p989.jpg' --> `p990.jpg' --> `p991.jpg' --> `p992.jpg' --> `p993.jpg' SIFT Keypoint Generation, version 2.5.0 ..... Connected component check... Connected component identification resulted in 1 component: component 1: p986.jpg, p987.jpg, p989.jpg, p991.jpg, p988.jpg, p990.jpg, p992.jpg p993.jpg Creating output file "tutorial.pto" You can now load the output file into hugin. Notice: You absolutely must adjust the field-of-view value for the images also, building pano from hugin assistant builds a perfectly adequate panorama. are you sure all is correct with your build and hardware? -- michael On Mon, Dec 15, 2008 at 06:30:53PM +0100, marexel wrote: > > hi, > > i now installed hugin 0.8.0.3565 according to > http://wiki.panotools.org/Hugin_Compiling_OpenSuse > on a suse 10.3 64bit. > > now i wanted to give > http://hugin.sourceforge.net/tutorials/multi-row/en.shtml > a try, but get some problems and no panorama: > > 1. i have to enter the controlpoints manually because of > Kommando:autopano-complete.sh --output /tmp/ap_res993OTA --points 20 > "/home/tutorial/p986.jpg" > "/home/tutorial/p987.jpg" > "/home/tutorial/p988.jpg" > "/home/tutorial/p989.jpg" > "/home/tutorial/p990.jpg" > "/home/tutorial/p991.jpg" > "/home/tutorial/p992.jpg" > "/home/tutorial/p993.jpg" > failed, errorcode:1 > > autopano-complete is installed: > su...@side:~> locate autopano-complete > /usr/local/bin/autopano-complete.old.sh > /usr/local/bin/autopano-complete.sh > tbc... > > 2. after i want them to be put together (via the "stitch now!" button) > i get the error > nona -z PACKBITS -r ldr -m TIFF_m -o test -i 0 /tmp/huginpto_AEZWXi > caught exception: std::bad_alloc > make: *** [test0000.tif] Fehler 1 > > nona is installed: > su...@side:~> locate nona > /usr/bin/nona > /usr/bin/nona_gui > /usr/bin/shownonascii > /usr/local/bin/nona > /usr/local/bin/nona_gui > /usr/local/share/hugin/nona.txt > /usr/local/share/hugin/xrc/data/nona_enblend.mk > /usr/local/share/hugin/xrc/data/nona_multilayer.mk > /usr/local/share/hugin/xrc/data/nona_smartblend.mk > /usr/share/hugin/nona.txt > /usr/share/hugin/xrc/data/nona_enblend.mk > /usr/share/hugin/xrc/data/nona_multilayer.mk > /usr/share/hugin/xrc/data/nona_smartblend.mk > tbc... > > 3. if i use the assistant alternatively and hit ceate panorama i get the > error > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 0 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 1 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 2 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 3 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 4 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 5 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 6 /tmp/huginpto_uxKC2M > nona -z PACKBITS -r ldr -m TIFF_m -o tescht -i 7 /tmp/huginpto_uxKC2M > enblend --compression NONE -w -f3660x1830 -o tescht.tif tescht0000.tif > tescht0001.tif tescht0002.tif tescht0003.tif tescht0004.tif > tescht0005.tif tescht0006.tif tescht0007.tif > Input images to small for coarse mask, switching to fine mask. > Loading next image: tescht0000.tif > Loading next image: tescht0001.tif > Creating blend mask: 1/4 2/4 3/4 4/4 > Optimizing 1 distinct seam. > Strategy 1, s0: 1/4 2/4 3/4 4/4 > Strategy 2: s0 > make: *** [tescht.tif] error accessing memory > make: *** file »tescht.tif« will be deleted > > any ideas what goes wrong? > thanks for advice, kr, > > marexel > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
