Hi Bruno, These 4 photos are all for the Nadir. Since these are taken off the nodal point, I usually manually assign a different lens number. Is this not appropriate?
Looks like with the initial Alignment after adding all of the control points, odd fitting parameters were set due to many bad alignment points. Having the intial bad alignment points is typical. I find I usually need to delete 10% after the first alignment. It looks like Hugin is basing all future alignments or optimizations on the previous results. I had to reset all data and re-align and everything was fine. Maybe I should make this part of my standard flow. Actaully, for my last 2 projects I did modify my flow to include the Nadir in the intial alignment, instead of adding after. I am trying to simplify my work flow, since I have much less time available and so many hugin projects in queue! Regards, Rick On Aug 21, 2:30 am, Bruno Postle <br...@postle.net> wrote: > On Thu 20-Aug-2009 at 08:05 -0700, RueiKe wrote: > > > > >I uploaded the pto file: > >http://groups.google.com/group/hugin-ptx/web/KL5_Rev1.pto?hl=en%05eeb... > > The problem is only with four photos 80,81,82,83 (this is a big > project). Basically, somehow they got a different lens number with > an extreme barrel distortion (b = -0.113). All the other photos are > fine. > > I don't know how this happened, but select these photos in the > Camera and Lens tab, and Change lens... so all photos are 'lens 0', > reoptimise, and the maximum control point error goes down to 5. > > >> > I have found in the past sporadic control points that show very large > >> > errors, but when reviewed look normal. I have included a screen > >> > capture <a href="http://groups.google.com/group/hugin-ptx/web/ > >> > Hugin_Error_20aug09.jpg?hl=en%05eeb80c98d0c9ce2">here</a> > > -- > Bruno --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to hugin-ptx@googlegroups.com To unsubscribe from this group, send email to hugin-ptx-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
