Hello Mac users, A bundle of the 2012.0.0_rc1 can be downloaded from Sourceforge and Launchpad Sourceforge: http://sourceforge.net/projects/hugin/files/hugin/hugin-2012.0/hugin-mac-2012.0.0_rc1.dmg/download
Launchpad: https://launchpad.net/hugin/2012.0/2012.0rc1/+download/hugin-mac-2012.0.0_rc1.dmg To prevent all confusion: This is a 32bit/64bit Intel bundle that will run on OS X as of 10.5. All tools are fully 32/64bit but the Gui is only 32bit as it is compiled against Carbon. hoi, Harry On 30.08.2012 22:10, Harry van der Wolf wrote: > Hugin-2012.0 RELEASE NOTES > > ABOUT > > Hugin is more than just a panorama stitcher. > > Hugin can be found at > * SourceForge: http://hugin.sourceforge.net/ > * Launchpad: https://launchpad.net/hugin > > NOTE: The translation is not yet complete for all languages for this > release. Please check further down in this mail for the status of the > translations. > > DOWNLOAD > > The 2012.0 source tarball can be downloaded > > * from SourceForge at > http://sourceforge.net/projects/hugin/files/hugin/hugin-2012.0/hugin-2012.0.0_rc1.tar.bz2/download > > < > http://sourceforge.net/projects/hugin/files/hugin/hugin-2012.0/hugin-2012.0.0_beta1.tar.bz2/download > > > > > > * from Launchpad at > > > https://launchpad.net/hugin/2012.0/2012.0rc1/+download/hugin-2012.0.0_rc1.tar.bz2 > > < > https://launchpad.net/hugin/2012.0/2012.0beta1/+download/hugin-2012.0.0_beta1.tar.bz2 > > > > > > This is a source code release. For executables see below. > > > > This tarball is equivalent to rev/changeset > > 5a8852eb5b3e3bd261df3162269431e506a33875 in our Mercurial > > repository, where it is also tagged 2012.0.0_rc1 > > > > Verify its SHA1SUM > > 5a8852eb5b3e3bd261df3162269431e506a33875 > > > > > > EXECUTABLES > > > > Users communities produce executables for their respective platforms. > > > > These executables are then added to the download section on SourceForge > at > > http://sourceforge.net/projects/hugin/files/hugin/ > > > > A number of users have built recent snapshots and executables are likely > > to be > > announced within a few days of this tarball release. > > > > Watch http://groups.google.com/group/hugin-ptx for the announcements of > > binary > > releases. If you don't see a binary for your platform it has most > > likely not > > been produced yet. Consider stepping up to the task. Instructions at > > > > > http://wiki.panotools.org/Development_of_Open_Source_tools#Supported_Platforms > > > > Announce your build on http://groups.google.com/group/hugin-ptx > > > > > > CHANGES SINCE 2011.4.0 > > > > The lensfun library for reading and writing lens parameters from/to > > database has now been integrated into Hugin. > > Users can now search the lensfun library and load lens parameters. > > > > Added new tool pto_gen for generation of pto file from image files. > > > > Other Improvements > > > > * Various improvements to cpfind including a prealign matching > > strategy and pair wise matching for multirow heuristic > > * Added option to keep exposure fused stacks > > * pano_modify: Added HDR autocrop option > > * Many more improvements and bug fixes. > > > > > > UPGRADING > > > > Upgrading from previous versions of Hugin should be seamless. If you do > have > > problems with old settings, these can be reset in the Preferences by > > clicking > > 'Load defaults'. > > > > It is strongly recommeded to set the default control point detector to > > Hugin's CPFind. It is the only control point generator endorsed by > Hugin. > > Third-party generators may be compatible with the plug-in architecture. > > > > > > COMPILING > > > > Users compiling from source refer to the dependencies listed at > > http://wiki.panotools.org/Development_of_Open_Source_tools#Dependencies > > > > and the build processes listed at > > > http://wiki.panotools.org/Development_of_Open_Source_tools#Build_your_Own_Test_Builds > > > > More information in the README and INSTALL_cmake files in the tarball. > > > > > > KNOWN ISSUES AND WORKAROUNDS > > > > Panosphere Overview window seperated from the content > > https://bugs.launchpad.net/hugin/+bug/726997 > > > > There is a known problem building Hugin with CMake 2.8.5rc2. > > Workaround: Upgrade to a newer CMake version. > > > > Mac OS X: > > - Mac OS X Tiger (10.4) is no longer supported. > > - The PPC platform is no longer supported. > > - The OpenMP enabled enblend is now compatible on Mac OS X Lion (10.7). > > - The cmake compilation of Hugin is currently broken due to the fact that > > the boost library on OS X is currently at version 1.50 and boost > > versions => 1.48 > > conflict with a number of Mac OS X macros (from AssertMacros.h). This can > > not be disabled as WxWindows for Mac (a.k.a. WxMac) needs these macros. > > An XCode build, where a specific boost (<=1.46) can be specified, is > > possible. The 2012.0 OSX bundle will be based on an XCode build with > boost > > 1.46. > > > > An updated list of issues deemed to be critical, including discussions > > and workarounds is in the issue tracker. > > > https://bugs.launchpad.net/hugin/+bugs?search=Search&field.importance=Critical > > > > > > TRANSLATIONS > > Not all languages for this release have been fully translated. Please > > see below the current status. > > > > bg.po: 576 translated messages, 426 fuzzy translations, 327 untranslated > > messages. > > > > ca_ES.po: 344 translated messages, 513 fuzzy translations, 472 > > untranslated messages. > > > > cs_CZ.po: 1330 translated messages. > > > > da.po: 1329 translated messages. > > > > de.po: 1329 translated messages. > > > > en_GB.po: 76 translated messages, 1255 untranslated messages. > > > > es.po: 1446 translated messages, 43 fuzzy translations, 25 untranslated > > messages. > > > > fi.po: 911 translated messages, 195 fuzzy translations, 223 untranslated > > messages. > > > > fr.po: 1322 translated messages, 6 fuzzy translations, 1 untranslated > > message. > > > > hu.po: 1329 translated messages. > > > > it.po: 1326 translated messages, 3 fuzzy translations. > > > > ja.po: 1264 translated messages, 39 fuzzy translations, 26 untranslated > > messages. > > > > ko.po: 577 translated messages, 410 fuzzy translations, 342 untranslated > > messages. > > > > nl.po: 1329 translated messages. > > > > pl.po: 938 translated messages, 221 fuzzy translations, 170 untranslated > > messages. > > > > pt_BR.po: 1326 translated messages, 3 fuzzy translations. > > > > ro.po: 747 translated messages, 313 fuzzy translations, 269 untranslated > > messages. > > > > ru.po: 1070 translated messages, 137 fuzzy translations, 122 > > untranslated messages. > > > > sk.po: 1140 translated messages, 108 fuzzy translations, 81 untranslated > > messages. > > > > sl.po: 547 translated messages, 398 fuzzy translations, 384 untranslated > > messages. > > > > sv.po: 1225 translated messages, 65 fuzzy translations, 39 untranslated > > messages. > > > > uk.po: 427 translated messages, 503 fuzzy translations, 399 untranslated > > messages. > > > > zh_CN.po: 1271 translated messages, 39 fuzzy translations, 19 > > untranslated messages. > > > > zh_TW.po: 1078 translated messages, 205 fuzzy translations, 46 > > untranslated messages. > > > > > > > > THANKS > > > > Thanks to all the contributors to this release and members of the > hugin-ptx > > mailing list, too many to mention here. > > > > Hugin can be found at http://hugin.sourceforge.net/ and at > > https://launchpad.net/hugin > > > > > > CHANGELOG > > > > A detailed changelog can be found in the file Changelog. > > > > -- > > You received this message because you are subscribed to the Google > > Groups "Hugin and other free panoramic software" group. > > A list of frequently asked questions is available at: > > http://wiki.panotools.org/Hugin_FAQ > > To post to this group, send email to [email protected] > > To unsubscribe from this group, send email to > > [email protected] > > For more options, visit this group at > > http://groups.google.com/group/hugin-ptx > > > -- > "In summary, I think you are trying to solve a problem that may not > need to be solved, using a tool that is not meant to solve it, without > understanding what is causing your problems and without knowing how > the tool actually works in the first place :)" > Jeffrey J. Kosowsky on the backuppc mailing list > > -- > You received this message because you are subscribed to the Google Groups > "Hugin and other free panoramic software" group. > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/hugin-ptx > -- Hugin development bundles for Mac OS X<http://panorama.dyndns.org/index.php?lang=en&subject=Hugin&texttag=Hugin> ImageFuser for Mac OS X <http://imagefuser.sourceforge.net/> KImageFuser for Linux<http://panorama.dyndns.org/index.php?lang=en&subject=KImageFuser&texttag=KImagefuser> -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
