Am Montag, 2. März 2015 04:29:46 UTC+1 schrieb Tduell: > > > Note that there are two unconnected image groups, each group shown in [ ]. > You might want to check that this is correct. I suspect unconnected image > > groups may cause problems, and think I have come across them before, but > can't for the life of me recall what project or where to be able to dredge > > up any more useful info. >
Beside the unconnected image there is another issue with this project: the images in each stack are connected by control points. But at the same time the position of the images in each stack is linked. Please use only one of this: * Either use control points between the images of each stack. Then allow the position of each image in the stack to be optimized (do not link them). * Or link the position of the images in the stack. In this case don't assign control points between the individual images of each stack. But not both at the same time. This is probably too much for the optimizer. -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/c6decc3d-54e7-4c38-a2c6-ee96a4b65dbf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
