On Wednesday, August 29, 2018 at 10:02:37 PM UTC+1, Phanto B wrote:
> > @ panostar: you mentionned "good set of lens parameters from a previous > similar stitch". Can you please explain ? > The lens distortion correction parameters (Hfov,a,b,c,d,e) are characteristic of the lens (at a particular focus/zoom setting) and shouldn't change significantly from run to run. So if these have been evaluated by the optimizer in a similar (successful) previous run, you can use them in a similar subsequent run and so relieve the optimizer of this job. You then need considerably fewer control points. All you need do is enter the parameters on the lens panel and then elect not to include these parameters in the optimization. For a full 360 panorama, you can optimize hfov to fine tune it so that the images exactly fit around the spherical stitching surface. John <https://groups.google.com/group/hugin-ptx/attach/15828cff377e09/Sans%20titre.png?part=0.1&authuser=0> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/1aee2688-939e-4bdd-bec1-06f3478e7a56%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.