That makes no difference to the display in the bottom left-hand corner. - Load images - create control points - go to fast panorama preview where the image in confined to the bottom left.
If I stick to the simpler(?) Panorama Preview, things look better, but I can quickly screw them up by telling that window to "center". Or by clicking, which interface is a complete mystery to me. Anyway, I reset from the optimization window. All good? Nope. Redoing the optimizing in exactly the same way as the first time produces different results. So much for resetting. So I just reload and repeat my steps. Anyway, working on it, though I wonder whether I screwed up my prefs somehow. I did switch to Hugin_stitch_project for stitching was was resulting in no output unless I manually did it, so I switched back to PTBatcherGui which "just works". What I got from you, which seems to be working, is to slowly optimize, starting from x on just two images, then finish with optimization of all the images, leaving one unoptimized for xyz and roll (so, just pitch is optimized). That gives me a good result, which in the case has the right orientation as well. -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/7237e2f6-ba68-466c-90ea-c19c93088403o%40googlegroups.com.
