* From "Olaf Molenveld" <[EMAIL PROTECTED]>
you can assign every controller number you want to the realtime controllers
on the RM1X....
in the default setting the 8 realtime controllers of the RM1x also send out
non-controller data (f.e. the midi- delay effects etc.)
me thinks the easiest way is to program the 8 controllers on the RM1x to
the default controller numbers rebirth uses...
Olaf
----- Original Message -----
From: liquide <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, August 13, 1999 9:58 AM
Subject: RM1x and ReBirth
Yesterday me and a friend hooked up the RM1x with ReBirth (v2.01) to
controll the realtime controller on ReBirth via the RM1x's eight
realtime-knobs.
It seemed to be quite simple to set up, but the RM1x (atleast ours) only
transmit the CUTOFF/VARIATION, RESONANCE/CHORUS and EG DECAY/REVERB knobs.
Probably the problem lays in ReBirth. Because the RM1x will transmit all
eight knob-movements, right?
We used ReBirth's "learn" funtion to figure out the controller numbers. Is
there any other way to figure out these? Could it be found in the manual or
the list book (though I've searched through the whole thing)? Or have I
missed something in the MIDI setup?
Greetings,
.liquide
[EMAIL PROTECTED]
http://hem.passagen.se/liquide
___________________________________________________________________________
The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service
provided by TekLab and is open to all members of the Internet community.
For more information about this list and other TekLab Mailing lists visit
our web site: http://www.teklab.com/services/mailinglists/
**> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
