* From Larry Steinke <[EMAIL PROTECTED]> Try turning the Jump setting (knob 2 in Pattern Playback mode) to OFF. If this is anything else, then it sends any program changes that are recorded in that phrase whenever the stop button is pressed. Also, check if there is actual program change data recorded in the sequence. (use Edit mode to look for program change events). I think that the bank and program settings in the Voice submode screen are not stored as midi messages in the recorded phrase, but I'm not sure exactly when they are sent. Maybe when you recorded the phrase, the program change messages were recorded as midi data, but when you change the voice in the voice submode screen it over-rides it (except maybe for when you press the stop button). - Larry S. [EMAIL PROTECTED] wrote: > * From [EMAIL PROTECTED] > > Hey list! This may have been discussed before, so please don't flame me if it > has. Can anyone tell me how to turn off program changes to the TG? I know how > to keep them from going out to my external gear, but every time I press stop > it selects the instrument that I first recorded the phrase with. I'm sure > it's probably simple, but I'm stumped. Thanks ___________________________________________________________________________ The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service provided by TekLab and is open to all members of the Internet community. For more information about this list and other TekLab Mailing lists visit our web site: http://www.teklab.com/services/mailinglists/ **> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
