For tracks assigned to external gear, I usually do both - set "TO TG" to off, and voice to "--------". Btw, there's a very quick way to do the latter - just press "Voice", then "+" and "-" (when the cursor is over "Bank" parameter, and reads "Phrase", this turns it to "---"). Besides, RM1X can filter incoming program change messages. Hit "Setup" three times, clear the corresponding check mark, and you're set. Have a nice day, Boris. > -----Original Message----- > From: Dustin Zahn [mailto:[EMAIL PROTECTED]] > Sent: Thursday, July 13, 2000 7:00 AM > To: [EMAIL PROTECTED] > Subject: Re: recieve channel? > > > Try going to the channel you want, and pressing setup three > times. From > there, turn it so the number below the words "TO TG" say off. > There you go. > Dustin > ----- Original Message ----- > From: Dizzy J. <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, July 12, 2000 10:44 AM > Subject: recieve channel? > > > > is there a way to select which midi channels the rm1x will > respond to when > > using it as a sound source? > > > > The only way I can figure out how to do this, is to go to > voice edit, and > > turn the volume down for any channel your not interested > in, but this > > should still eat polyphony. > > > > >
