> Hi Tomasz, > > I dont know if you are back. Right now. ;D Its good to have you back :-)
> > Anyways i have managed to compile and install the > 2.6.21 kernal ye! ye! :-) >From the OpenEmbedded tree? Actually I spent a whole lot of time trying to compile the OE tree and for some reason or another, it kept on failing. So I have done it from the original kernel from kernels.org and patching it. > > Just a few questions: > > 1. As for the wifi, I heard that some russian guy > suggests that the card is a clone of ACX100 and the > driver for it is available here > http://acx100.sourceforge.net/ before i try it out i > need ur advise if you have already tried this? I haven't tried. If you are going to try, for start try to check if part/producent numbers (like reported with lspci) return appropriate data, otherwise that card might not be recognised by a driver. You can try changing that numbers in drivers code so it will SEE the card... Then we can try modifying code... But I really haven't taken a look at wi-fi still. Still couldn't try the wifi. Will be going to it soon. > > 2. Does the sound card work? I couldnt really find a > way to test it out! I haven't had time for this. It shouldn't be hard to make it work. You can try testing with cat /dev/urandom > /dev/dsp* and check mixer levels with /proc /sys interface; but I doubt if it's recognised. Try storing 'dmesg' on CF card and then read it. I'll be happy owner of the serial cable the next week. ;) Still no luck with the sound drives. I have figured that the IPAQ actually used the TI TSC2101 touch screen+sound. As we know the touch screen works. However, no luck with sound yet. > > 3. Curently my compiled kernal boots from the CF card. > what changes do I have to make to boot from SD card. > This is cause I founf a CF-WIFI card with linux > drivers. So i will boot from SD and run WIFI from CF. SD card should be recognised without many problems and detected as sth like: /dev/mmcblk0<something> and it did in mine version. But during read I/O errors happened and I can't tell why. If your kernel does not detect SD card try 'diffying' mine and yours config to see differences. Hope this mail helps, in any way. Nevertheless I'd start with IRda, BT and power management, and then try wi-fi. + I guess we should stick with hx2000 letters to the mailing list, it might seem stupid to ourselves, but someone might find here something interesting. ;-) Lets hope to excite the others. Lets get it working!! Rgds, Shariq ------------------------------------------------------------------ - - - DISCLAIMER: This e-mail (including any attachments) may contain confidential information. If you are not the intended recipient, you are hereby notified that any dealing, review, distribution, printing, copying or use of this e-mail is strictly prohibited. If you have received this email in error, please notify the sender or MIMOS Berhad immediately and delete the original message. Opinions, conclusions and other information in this e-mail that do not relate to the official business of MIMOS Berhad and/or its subsidiaries shall be understood as neither given nor endorsed by MIMOS Berhad and/or its subsidiaries and neither MIMOS Berhad nor its subsidiaries accepts responsibility for the same. All liability arising from or in connection with computer viruses and/or corrupted e-mails is excluded to the fullest extent permitted by law.
_______________________________________________ Hx2000-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx2000-port
