Hello Todd, Wednesday, May 31, 2006, 11:13:33 PM, you wrote:
> Bill Reese was able to resolve the problem with the hx4700 internal ACX. > It is now working, and both trees are updated! cvs update if you build > your own kernel. Hopefully, Rene will be able to get this into Familiar > 0.8.4 build soon (Rene, you can use the K2-6-15-DEV branch -- I can tag > current files for you, if you want). Congratulations from h4000 port! ;-). And now I get a chance to ask for specifics pondering how we can get hold of it ;-). 1. How exactly ACX100 is connected in hx4700? On Wiki, was able to find only mentioning it's on CS5#. In h4000, it is essentally connected to PCMCIA bus and can be seen with cardctl. Is it the same for hx4700? (I pray it is.) 2. If so, why hx4700_acx.c doesn't interract with hx4700_pcmcia.c (or PCMCIA subsyetm in general)? Btw, about hx4700_acx.c - it appears it's machine-specific code for hx4700, shouldn't it live in it's machine dir? 3. Is it required to build ACX as module or builtin would work also? 4. What about firmware files? Is it required for driver to work or can it be satisfied with what's inside cheap (I got it has flash for that). 5. Can you please provide some trivia of what one can expect on successful driver load? Should just new network i/f appear immediately and can be ifupped? Are wirelesstools or something required to make actual connection? Thanks! -- Best regards, Paul mailto:[EMAIL PROTECTED] _______________________________________________ Hx4700-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx4700-port
