pHilipp Zabel <[EMAIL PROTECTED]> írta:
> On 11/28/06, sza2 <[EMAIL PROTECTED]> wrote: > > > mtdblock0 is write-protected (never unlocked), look > > > > However you mentioned bootloader is fit in 256k. But > > mtdblock0 is 1MB. Is the remaining 768k is writable? > > If I understood correctly, the remaining 768k are reserved > for the SDG bootloader. This is where the windows > kernel was located before flashing the SDG bootloader. > But you can change that, of course. > > > First I planed to rewrite mtdblock0 with the WM image part > > to check what happen after Linux reboots. > > That won't work, as you'd overwrite the SDG bootloader with > the wince kernel. Yes, I know. I just want to try the following: 1. store a wince image 2. flash sdg's bootloader + kernel 3. boot linux 4. write 768k + 2MB from wince image 5. reboot... If everything went good WM should start. Than I learn a lot of and write a code which will do the opposite: flash the bootloader and kernel from WM:-) > > regards > Philipp > _______________________________________________________ Váltson egyszerűen, olcsóbb kötelezőre! http://www.biztositas.hu/origo/gfb - a kötelező megoldás. _______________________________________________ Hx4700-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx4700-port
