On 10/16/07, Brian Green <[EMAIL PROTECTED]> wrote: > Hi Philipp > > pHilipp Zabel wrote: > > On 10/16/07, Brian Green <[EMAIL PROTECTED]> wrote: > >> Hi > >> > >> I'm trying to re-installed Mobile 5.0 to my hx4700. > >> > >> Currently the hx4700 has the SDG Systems (1.2.4.hx4700) bootloader in > >> ROM, with GPE 2.7 Linux 2.6.16.hh2 - Familiar v 0.8.4. > >> > >> I believe I still have the original image created by dd back in 2006 > >> which I have just restored, using dd, to a freshly formatted 1GB SD. > >> > >> When I try to execute s2d, minicom gives: > >> > >> " > >> Welcome to minicom 2.2 > >> > >> OPTIONS: I18n > >> Compiled on Nov 26 2006, 03:37:56. > >> Port /dev/ttyUSB0 > >> > >> Press CTRL-A Z for help on special keys > >> > >> Invalid command : AT V1 X4 &c1 E1 Q0 > > > > That's ok. "AT V1 X4 &c1 E1 Q0" is what minicom sends to initialize > > the modem on the other end (see minicom -s -> modem & dialing -> init > > string), and the htc bootloader obviously doesn't understand AT > > commands. > > > >> For a help screen, use command ? or h > >> USB> > >> " > >> > >> Entering the command s2d gives: > >> > >> " > >> Invalid command : s2d > >> For a help screen, use command ? or h > >> " > > > > And that's ok, too, because in the bootloader version shipped with the > > hx4700, the s2d command is not implemented. The only way to put that > > image back into flash is to put the SD card in and have the bootloader > > recognize it automatically on startup (it says 'press power to flash' > > or similar if the checksums are correct). > > Or maybe soon with my small USB flashing tool > > (http://www.linuxtogo.org/~ph5/htc-tools/), if somebody supplies the > > hx4700 wince partition list for htc-flash.c and isn't afraid to test. > > Patches welcome :) > > > > OK. I started the SDG bootloader with Contacts, Inbox, and Reset. > > I get the SDG Systems Embedded Reflash Utility screen. Then "Can't read > control file". Which is repeated when I press Record. > > So, the checksum is wrong?
No no, if you want to flash an SD image that was created with d2s by the _HTC_ bootloader, you also have to use the HTC bootloader to write it back. Plug in the SD card, start the HTC loader with <Contacts>+<iTask>+<Reset>, and if you are lucky and everything went right during backup and restoration of the SD card image, it should be recognized at this point. regards Philipp _______________________________________________ Hx4700-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/hx4700-port
