No, all you need is DFS broker(+dfs itself) and range server on "slaves" to be able to talk with HT through python-bindings.
On Fri, Jul 30, 2010 at 8:04 AM, Alex Dong <[email protected]> wrote: > Sanjit, switching to a full config file seems to have solved the issue. > If this is the case, let's say I have two servers, fairfield and clifton. > Hypertable runs on clifton and my client side is on fairfileld. > Does this mean I'll have to have at least Hyperspace running on > fairfield as well? Or, maybe I should be able to modify the conf > file and all should work fine? > > Thanks, > > Alex > > On Fri, Jul 30, 2010 at 10:13 AM, Sanjit Jhala <[email protected]> wrote: > > Hi Alex, > > > > Whats the error message you see in the logs (particularly the Hyperspace > > log) ? > > Also can you try adding the following to your config file: > > > > Hyperspace.Replica.Host=localhost > > Hyperspace.Replica.Port=38040 > > Hyperspace.Replica.Dir=hyperspace > > Hyperspace.Replica.Workers=20 > > > > -Sanjit > > > > On Thu, Jul 29, 2010 at 5:10 PM, Alex Dong <[email protected]> wrote: > >> > >> I tried to use the cfg file in /opt/hypertable/current/conf, which > >> is working fine with the thrift client, etc. But still no luck. > >> > >> Alex > >> > >> On Jul 30, 8:07 am, Alex Dong <[email protected]> wrote: > >> > Hi Stanislav, > >> > > >> > I just tried the binding. The first thing I ran into is that > >> > the .cfg file contains an old Hyperspace.Master.Host entry. > >> > after I changed to Replica, I started to get "segmentation fault". > >> > > >> > I haven't really digged into hyperspace code to figure out > >> > why. Just wondering maybe you've seen this before. > >> > > >> > Here is the hypertable.cfg file I'm using: > >> > > >> > $ cat hyperspace.cfg > >> > # Hyperspace > >> > Hyperspace.Replica.Host=localhost > >> > Hyperspace.Replica.Port=38040 > >> > > >> > # Hypertable.Master > >> > Hypertable.Master.Host=localhost > >> > Hypertable.Master.Port=38050 > >> > > >> > Anything obviously wrong with this? > >> > > >> > Alex > >> > > >> > On Jul 28, 1:10 am, Stanislav Yudin <[email protected]> wrote: > >> > > >> > > Yes, we are using this code as the base for our python module to > >> > > access > >> > > hypertable. Its quite stable for us and last time we were using it > on > >> > > 0.9.3.2 so it should work on 0.9.3.4 too. > >> > > >> > > On Tue, Jul 27, 2010 at 9:07 PM, Alex Dong <[email protected]> > >> > > wrote: > >> > > > I notice that there have been quite a few discussion over the > >> > > > python- > >> > > > hypertable binding. Especially in this follow-up [1] and the > >> > > > original > >> > > > announcement [2]. I'm wondering is this binding up-to-date? > Anyone > >> > > > has used it on 0.9.3.4? > >> > > >> > > > Thanks, > >> > > > Alex > >> > > >> > > > [1]: > >> > > >> > > > >> > > > > > http://groups.google.com/group/hypertable-dev/browse_thread/thread/c5... > >> > > > [2]: > >> > > >> > > > >> > > > > > http://groups.google.com/group/hypertable-dev/browse_thread/thread/52... > >> > > >> > > > -- > >> > > > You received this message because you are subscribed to the Google > >> > > > Groups > >> > > > "Hypertable Development" group. > >> > > > To post to this group, send email to > >> > > > [email protected]. > >> > > > To unsubscribe from this group, send email to > >> > > > > >> > > > [email protected]<hypertable-dev%[email protected]> > <hypertable-dev%[email protected]<hypertable-dev%[email protected]> > > > >> > > > . > >> > > > For more options, visit this group at > >> > > >http://groups.google.com/group/hypertable-dev?hl=en. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups > >> "Hypertable Development" group. > >> To post to this group, send email to [email protected]. > >> To unsubscribe from this group, send email to > >> [email protected]<hypertable-dev%[email protected]> > . > >> For more options, visit this group at > >> http://groups.google.com/group/hypertable-dev?hl=en. > >> > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Hypertable Development" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]<hypertable-dev%[email protected]> > . > > For more options, visit this group at > > http://groups.google.com/group/hypertable-dev?hl=en. > > > > -- > You received this message because you are subscribed to the Google Groups > "Hypertable Development" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<hypertable-dev%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/hypertable-dev?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Hypertable Development" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hypertable-dev?hl=en.
