Subject: remove trailing whitespaces in i2c/busses/Kconfig From: Wolfram Sang <[EMAIL PROTECTED]>
Signed-off-by: Wolfram Sang <[EMAIL PROTECTED]>
---
drivers/i2c/busses/Kconfig | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
Index: linux-playground/drivers/i2c/busses/Kconfig
===================================================================
--- linux-playground.orig/drivers/i2c/busses/Kconfig 2008-03-10
12:11:24.000000000 +0100
+++ linux-playground/drivers/i2c/busses/Kconfig 2008-03-10 12:12:11.000000000
+0100
@@ -135,7 +135,7 @@
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-elektor.
config I2C_GPIO
@@ -190,7 +190,7 @@
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the Intel
- 810/815 family of mainboard I2C interfaces. Specifically, the
+ 810/815 family of mainboard I2C interfaces. Specifically, the
following versions of the chipset are supported:
i810AA
i810AB
@@ -248,8 +248,8 @@
tristate "IBM PPC 4xx on-chip I2C interface"
depends on IBM_OCP
help
- Say Y here if you want to use IIC peripheral found on
- embedded IBM PPC 4xx based systems.
+ Say Y here if you want to use IIC peripheral found on
+ embedded IBM PPC 4xx based systems.
This driver can also be built as a module. If so, the module
will be called i2c-ibm_iic.
@@ -269,7 +269,7 @@
depends on ARCH_IXP2000
select I2C_ALGOBIT
help
- Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
+ Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
system and are using GPIO lines for an I2C bus.
This support is also available as a module. If so, the module
@@ -354,7 +354,7 @@
on the parport driver. This is meant for embedded systems. Don't say
Y here if you intend to say Y or M there.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-parport.
config I2C_PARPORT_LIGHT
@@ -372,12 +372,12 @@
the clean but heavy parport handling is not an option. The
drawback is a reduced portability and the impossibility to
daisy-chain other parallel port devices.
-
+
Don't say Y here if you said Y or M to i2c-parport. Saying M to
both is possible but both modules should not be loaded at the same
time.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-parport-light.
config I2C_PASEMI
@@ -401,7 +401,7 @@
This driver is deprecated in favor of the savagefb driver.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called i2c-prosavage.
config I2C_S3C2410
@@ -417,7 +417,7 @@
depends on PCI
select I2C_ALGOBIT
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
S3 Savage 4 I2C interface.
This driver is deprecated in favor of the savagefb driver.
@@ -452,7 +452,7 @@
If you don't know what to do here, say N.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called scx200_i2c.
This driver is deprecated and will be dropped soon. Use i2c-gpio
@@ -483,14 +483,14 @@
If you don't know what to do here, say N.
- This support is also available as a module. If so, the module
+ This support is also available as a module. If so, the module
will be called scx200_acb.
config I2C_SIS5595
tristate "SiS 5595"
depends on PCI
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
@@ -500,7 +500,7 @@
tristate "SiS 630/730"
depends on PCI
help
- If you say yes to this option, support will be included for the
+ If you say yes to this option, support will be included for the
SiS630 and SiS730 SMBus (a subset of I2C) interface.
This driver can also be built as a module. If so, the module
@@ -634,7 +634,7 @@
help
This driver supports ISA boards using the Philips PCA9564
parallel bus to I2C bus controller.
-
+
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
--
Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
signature.asc
Description: Digital signature
_______________________________________________ i2c mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/i2c
