Hi Jon,

On Fri, 2 May 2008 12:02:27 -0400, Jon Smirl wrote:
> New version with your fix.
> 
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index bbe787b..b141057 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -99,7 +99,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned
> timeout, int writing)

Long lines folded, patch doesn't apply...

>       u32 x;
>       int result = 0;
> 
> -     if (i2c->irq == 0)
> +     if (i2c->irq == NO_IRQ)
>       {
>               while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
>                       schedule();
> @@ -329,10 +329,9 @@ static int fsl_i2c_probe(struct platform_device *pdev)
>               return -ENOMEM;
> 
>       i2c->irq = platform_get_irq(pdev, 0);
> -     if (i2c->irq < 0) {
> -             result = -ENXIO;
> -             goto fail_get_irq;
> -     }
> +     if (i2c->irq < 0)
> +             i2c->irq = NO_IRQ; /* Use polling */
> +

After this change, label fail_get_irq is unused so you should remove
it. gcc should have told you, didn't it?

>       i2c->flags = pdata->device_flags;
>       init_waitqueue_head(&i2c->queue);
> 
> @@ -344,7 +343,7 @@ static int fsl_i2c_probe(struct platform_device *pdev)
>               goto fail_map;
>       }
> 
> -     if (i2c->irq != 0)
> +     if (i2c->irq != NO_IRQ)
>               if ((result = request_irq(i2c->irq, mpc_i2c_isr,
>                                         IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
>                       printk(KERN_ERR
> @@ -367,7 +366,7 @@ static int fsl_i2c_probe(struct platform_device *pdev)
>       return result;
> 
>        fail_add:
> -     if (i2c->irq != 0)
> +     if (i2c->irq != NO_IRQ)
>               free_irq(i2c->irq, i2c);
>        fail_irq:
>       iounmap(i2c->base);
> @@ -384,7 +383,7 @@ static int fsl_i2c_remove(struct platform_device *pdev)
>       i2c_del_adapter(&i2c->adap);
>       platform_set_drvdata(pdev, NULL);
> 
> -     if (i2c->irq != 0)
> +     if (i2c->irq != NO_IRQ)
>               free_irq(i2c->irq, i2c);
> 
>       iounmap(i2c->base);
> 
> 


-- 
Jean Delvare

_______________________________________________
i2c mailing list
i2c@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

Reply via email to