Hi Jean, On Fri, Jun 27, 2008 at 02:52:36PM +0200, Jean Delvare wrote: > Hi all, > > As was mentioned previously, I have decided to group the i2c bus > drivers to make it easier for the users to know what they need (and also > for me to know what drivers might be affected by a given problem.) Here > is the list I have at the moment. There are still many drivers in the > "Other" category. I suspect that many of these should move to the > "Embedded" category, but I don't know for sure. So I would welcome > comments and suggestions for improvements.
From my first glimpse: > > # PC SMBus host controller drivers > obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o > obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o > obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o > obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o > obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o > obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o > obj-$(CONFIG_I2C_I801) += i2c-i801.o > obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o > obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o > obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o > obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o > obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o > obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o > obj-$(CONFIG_I2C_VIA) += i2c-via.o > obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o > > # Mac SMBus host controller drivers > obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o > obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o > > # Embebbed system I2C/SMBus host controller drivers > obj-$(CONFIG_I2C_AT91) += i2c-at91.o > obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o > obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o > obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o > obj-$(CONFIG_I2C_OMAP) += i2c-omap.o > obj-$(CONFIG_I2C_PXA) += i2c-pxa.o > obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o > obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o > > # External I2C/SMBus adapter drivers > obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o > obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o > obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o > obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o > > # Graphics adapter I2C/DDC channel drivers > obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o > > # Other I2C/SMBus bus drivers > obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o > obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o > obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o Embedded. > obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o It is not SMBus, but still PC (ISA). > obj-$(CONFIG_I2C_CPM) += i2c-cpm.o Embedded. > obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o > obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o > obj-$(CONFIG_I2C_ISCH) += i2c-isch.o > obj-$(CONFIG_I2C_MPC) += i2c-mpc.o Embedded. > obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o > obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o > obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o > obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o It is not SMBus, but still PC (ISA). > obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o External means probably: Connected via some bus? This one is just memory mapped... > obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o > obj-$(CONFIG_I2C_PNX) += i2c-pnx.o > obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o Embedded. > obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o Embedded. > obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o PC? Looking at MODULE_DESCRIPTION. > obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o > obj-$(CONFIG_I2C_STUB) += i2c-stub.o > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o > obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o > > (Of course, Kconfig has similar groups.) > > Thanks, > -- > Jean Delvare > > _______________________________________________ > i2c mailing list > i2c@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/i2c -- Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry
signature.asc
Description: Digital signature
_______________________________________________ i2c mailing list i2c@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/i2c