From: Jonathan Cameron <[EMAIL PROTECTED]> Add fast_mode option to i2c_pxa_platform_data and use it to set the ICR_FM bit appropriately when i2c_pxa_reset is called. Parameter called fast_mode rather than frequency as this driver is also used for the i2c_pxa_pwr bus which has different normal and fast frequencies.
Signed-off-by: Jonathan Cameron <[EMAIL PROTECTED]> -- This is basically a repost of the original patch with use_pio and fast_mode converted to bit fields as suggested / agreed by Eric Miao and Ben Dooks. Patch is against 2.6.27-rc1 drivers/i2c/busses/i2c-pxa.c | 6 ++++-- include/asm-arm/arch-pxa/i2c.h | 3 ++- include/asm-arm/arch-pxa/pxa-regs.h | 1 + 3 files changed, 7 insertions(+), 3 deletions(-) diff -uprN -X a/Documentation/dontdiff a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h --- a/include/asm-arm/arch-pxa/pxa-regs.h 2008-07-31 12:02:51.000000000 +0100 +++ b/include/asm-arm/arch-pxa/pxa-regs.h 2008-07-31 12:34:44.000000000 +0100 @@ -448,6 +448,7 @@ #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ #define ICR_SADIE (1 << 13) /* slave address detected int enable */ #define ICR_UR (1 << 14) /* unit reset */ +#define ICR_FM (1 << 15) /* fast mode */ #define ISR_RWM (1 << 0) /* read/write mode */ #define ISR_ACKNAK (1 << 1) /* ack/nak status */ diff -uprN -X a/Documentation/dontdiff a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h --- a/include/asm-arm/arch-pxa/i2c.h 2008-07-31 12:00:05.000000000 +0100 +++ b/include/asm-arm/arch-pxa/i2c.h 2008-07-31 16:01:28.000000000 +0100 @@ -65,7 +65,8 @@ struct i2c_pxa_platform_data { unsigned int slave_addr; struct i2c_slave_client *slave; unsigned int class; - int use_pio; + int use_pio:1; + int fast_mode:1; }; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); diff -uprN -X a/Documentation/dontdiff a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c --- a/drivers/i2c/busses/i2c-pxa.c 2008-07-31 12:02:42.000000000 +0100 +++ b/drivers/i2c/busses/i2c-pxa.c 2008-07-31 16:10:43.000000000 +0100 @@ -65,7 +65,8 @@ struct pxa_i2c { unsigned long iosize; int irq; - int use_pio; + int use_pio:1; + int fast_mode:1; }; #define _IBMR(i2c) ((i2c)->reg_base + 0) @@ -364,7 +365,7 @@ static void i2c_pxa_reset(struct pxa_i2c writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ - writel(I2C_ICR_INIT, _ICR(i2c)); + writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); @@ -1013,6 +1014,7 @@ static int i2c_pxa_probe(struct platform if (plat) { i2c->adap.class = plat->class; i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; } if (i2c->use_pio) { _______________________________________________ i2c mailing list i2c@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/i2c