On Sep 23, 2008, at 9:13 AM, Anton Vorontsov wrote: > On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a > Freescale MC9S08QG8 (MCU) chip with the custom firmware > pre-programmed. The chip is used to power-off the board by the > software, and to control some GPIO pins. > > Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]> > --- > drivers/i2c/chips/Kconfig | 11 ++ > drivers/i2c/chips/Makefile | 1 + > drivers/i2c/chips/mcu_mpc8349emitx.c | 209 +++++++++++++++++++++++++ > +++++++++ > 3 files changed, 221 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/chips/mcu_mpc8349emitx.c
is the plan to connect ppc_md.machine_shutdown() with this? - k _______________________________________________ i2c mailing list i2c@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/i2c
