1) I wouldn't say better... rather, complementary, and certainly
cheaper. Visiting the Butiá pages, the only picture I see showing an MCU
http://www.fing.edu.uy/inco/proyectos/butia/images/pistaButia.jpg is
showing an Arduino. Add a motor driver, and we are well above $30, plus
shipping. The USBButiá board is maybe cheaper IF done in quantity by
experts (then add labor).
MSP430 + (L293D OR some darlington array) can be "free" if you get them
as samples from TI, or less than $5 when purchased, /plus shipping/, the
old bane. the advantage of using a darlington driver is that then you
may use plain DC motors, which can be free if lucky with old electronic
parts (beautiful gear system available in old CDROM drives)
2) yop - the XO "drives" the vehicle with the MSP430 option also. Now, I
put quote marks as I have no idea - yet - on how to send data direct
realtime from the XO to the robot, bypassing the MCU. What seems to be
happening is that Butiá depends on sending code/program to the Arduino,
and the the 'duino does the brains of the robot. (¿Butiás, me corrigen,
por favor?). So yes, you may send code to the 430, and then same.
Putting the XO on top of the robot appears to me as a cute photo op
thing, not a necessity. It would be amazingly cool if the XO camera
would capture images that real time were processed by the XO, or man a
sonar sensor, or something. So far I don't think this is happening, and
the XO on the platform feels like a /pour la gallerie/ innocent gimmick.
Bottom line: control, it's a software issue. I am coding something that
will allow LOGO-like instructions to be the input, instead of complex-er
C, but not there yet
3) Oh! but LEGO has a good marketing budget, and I may be mistaken, have
already been purchased by the brilliant UY education administrators for
every single middle/high school.
Children have no ideas what is going on anywhere, so I do not worry
about that (A LEGO driver brick is as much magical and as an MCU).
I do worry about the cost: A LEGO is assured to be carefully kept under
lock and key, and only safe students and teachers allowed to touch it,
you can buy a couple hundred MCUs for the cost of a single LEGO brain. A
430-based solution, and even an Arduino, might have a chance to be lent
to a kid. A base kit, 430, or ATtiny, say $10 USD including two motors
and sensors and PCB, could even be purchased by kids or their parents or
the result of a bake sale. At http://kidbot.org we are working on
putting such together.
BTW, the Universidad Pontificia of Lima, Perú, and the Universidad
Católica of Bolivia, I would say the MITs of those respective countries,
have started degree programs in Mechatronics a couple years ago. Both
have only ONE semester of actual hands-on robotying, both are Lego only.
Those professors are so highly trained and respected and bright that
they must know what they are doing, which means the rest of us must be
wrong to think other options :-)
4) The choices made by Butiá make sense in some context (UdelaR fing),
and I genuinely praise and respect their effort, but IMHO are so far
VERY hard to emulate independently.
IF
1) the PCB were available
2) all parts were locally available, even better as kits, reducing
shipping/customs issues
I might agree on the "designed to be reproduced by any one".
(their page says they are available locally, but give no details)
What @ http://kidbot.org we are trying to put together is precisely a
set of materials, parts and such that, more than anything, ARE *easy to
find parts*. Right now we are VERY busy with the solar vehicle for
Saturday's race, so this is on hold. On that one: the only part we paid
for is the solar cells - everything else was scrounged from electronic
cadavers. Of course we have the benefit that in the USA you can get dead
printers by simple trashcan-diving, while under certain ideologies you
have to buy everything. Even then, I ideologically favor plain DC motors
over complex feedback ones.
I am 100% convinced that the MSP430 could, potentially, provide a
cheaper, easier to *make* robotics platform, eventually. However, I
would want to see that as a collaboration with Butiá rather than an
"instead". I have not contacted them yet on this, as mentioned above I
have bee busy with the other project (actually mostly with my patent.
BTW, as of yesterday, I am "patent pending", yeeeha!).
Yama
On 09/27/2012 08:17 AM, Tony Anderson wrote:
Hi,
I am wondering how this TI MSP430 running on XO 1 - Robotics! relates
to the Butia project in Uruguay. Is this a better solution?
What appeals to me the most about Butia is that it enable the child to
its own XO driving the vehicle. Can this be done with the MSP430?
In Uruguay there was a demonstration of the Lego robot - pathetic! It
was tied to an umbilical cord. It was pre-built so the children had no
idea of how it worked or what was going on inside. And, of course, it
is frightfully expensive.
The Butia project has developed a control board which is designed to
be reproduced by any one. I am hoping that someone in SF will
undertake to build the Butia kit. Could the MSP430 provide a cheaper
and easier to build control board for Butia?
Yours,
Tony
_______________________________________________
IAEP -- It's An Education Project (not a laptop project!)
IAEP@lists.sugarlabs.org
http://lists.sugarlabs.org/listinfo/iaep
_______________________________________________
IAEP -- It's An Education Project (not a laptop project!)
IAEP@lists.sugarlabs.org
http://lists.sugarlabs.org/listinfo/iaep