Applied.

thanks,
-Len

On Monday 04 February 2008 18:24, Roel Kluin wrote:
> Roland Dreier wrote:
> >  >                 /* safety net should the EC not support AUTO
> >  >                  * or FULLSPEED mode bits and just ignore them */
> >  >                 if (level & TP_EC_FAN_FULLSPEED)
> >  >                         level |= 7;     /* safety min speed 7 */
> >  >                 else if (level & TP_EC_FAN_FULLSPEED)
> >  >                         level |= 4;     /* safety min speed 4 */
> >  > 
> >  > Note the duplicate test 'if (level & TP_EC_FAN_FULLSPEED)'. should
> >  > this be replaced by
> > 
> > Actually I suspect one of the two tests should be against TP_EC_FAN_AUTO
> > (based on the comment).
> > 
> 
> Thanks Roland, for your info
> 
> based on the comments in commit eaa7571b2d1a08873e4bdd8e6db3431df61cd9ad,
> I think this should be modified like below:
> 
> ACPI: thinkpad-acpi: add a safety net for TPEC fan control mode
> The Linux ThinkPad community is not positive that all ThinkPads that do
> HFSP EC fan control do implement full-speed and auto modes, some of the
> earlier ones supporting HFSP might not.
> 
> If the EC ignores the AUTO or FULL-SPEED bits, it will pay attention to the
> lower three bits that set the fan level. And as thinkpad-acpi was leaving
> these set to zero, it would stop(!) the fan, which is Not A Good Thing.
> So, as a safety net, we now make sure to also set the fan level part of the
> HFSP register to speed 7 for full-speed, and a minimum of speed 4 for auto
> mode.
> --
> second TP_EC_FAN_FULLSPEED should be P_EC_FAN_AUTO
> 
> 
> Signed-off-by: Roel Kluin <[EMAIL PROTECTED]>
> ---
> diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
> index cf56647..3c323fe 100644
> --- a/drivers/misc/thinkpad_acpi.c
> +++ b/drivers/misc/thinkpad_acpi.c
> @@ -4138,7 +4138,7 @@ static int fan_set_level(int level)
>                * or FULLSPEED mode bits and just ignore them */
>               if (level & TP_EC_FAN_FULLSPEED)
>                       level |= 7;     /* safety min speed 7 */
> -             else if (level & TP_EC_FAN_FULLSPEED)
> +             else if (level & TP_EC_FAN_AUTO)
>                       level |= 4;     /* safety min speed 4 */
>  
>               if (!acpi_ec_write(fan_status_offset, level))
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel

Reply via email to