I understood!
It sometimes occurs when pressing keys <Fn> + <F5> or <Fn> + <F6> for
management of monitor brightness
--
Regars,
Evgeny
Thu, 06 Nov 2014 10:23:19 +0300 от Евгений shur <eshur2...@mail.ru>:
>
>
>Hi!
>
>In /var/llog/messages
>...
>Nov 6 09:37:54 thinkpad-1-home kernel: thinkpad_acpi: THERMAL ALERT: unknown
>thermal alarm received
>Nov 6 09:37:54 thinkpad-1-home kernel: thinkpad_acpi: unhandled HKEY event
>0x6060
>Nov 6 09:37:54 thinkpad-1-home kernel: thinkpad_acpi: please report the
>conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>...
>Nov 6 09:37:55 thinkpad-1-home kernel: thinkpad_acpi: THERMAL ALERT: unknown
>thermal alarm received
>Nov 6 09:37:55 thinkpad-1-home kernel: thinkpad_acpi: unhandled HKEY event
>0x6060
>Nov 6 09:37:55 thinkpad-1-home kernel: thinkpad_acpi: please report the
>conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>...
>
>dmesg in an investment.
>
>
> smart hdd
>
>smartctl -a /dev/sda
>smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-504.el6.x86_64] (local
>build)
>Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
>
>
>=== START OF INFORMATION SECTION ===
>Device Model: Crucial_CT960M500SSD1
>Serial Number: 1338094ECC66
>LU WWN Device Id: 5 00a075 1094ecc66
>Firmware Version: MU02
>User Capacity: 960 197 124 096 bytes [960 GB]
>Sector Sizes: 512 bytes logical, 4096 bytes physical
>Device is: Not in smartctl database [for details use: -P showall]
>ATA Version is: 8
>ATA Standard is: ATA-8-ACS revision 6
>Local Time is: Thu Nov 6 10:16:02 2014 MSK
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status: (0x80) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Enabled.
>Self-test execution status: ( 0) The previous self-test routine
>completed
> without error or no self-test has ever
>
> been run.
>
>Total time to complete Offline
>
>data collection: ( 4470) seconds.
>
>Offline data collection
>
>capabilities: (0x7b) SMART execute Offline immediate.
>
> Auto Offline data collection on/off
>support.
> Suspend Offline collection upon new
>
> command.
>
> Offline surface scan supported.
>
> Self-test supported.
>
> Conveyance Self-test supported.
>
> Selective Self-test supported.
>
>SMART capabilities: (0x0003) Saves SMART data before entering
>
> power-saving mode.
>
> Supports SMART auto save timer.
>
>Error logging capability: (0x01) Error logging supported.
>
> General Purpose Logging supported.
>
>Short self-test routine
>
>recommended polling time: ( 2) minutes.
>
>Extended self-test routine
>
>recommended polling time: ( 74) minutes.
>
>Conveyance self-test routine
>
>recommended polling time: ( 3) minutes.
>
>SCT capabilities: (0x0035) SCT Status supported.
>
> SCT Feature Control supported.
>
> SCT Data Table supported.
>
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
>WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x0032 100 100 --- Old_age Always
>- 0
> 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always
>- 0
> 9 Power_On_Hours 0x0032 100 100 --- Old_age Always
>- 3478
> 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always
>- 74
>170 Unknown_Attribute 0x0032 100 100 --- Old_age Always
>- 18
>171 Unknown_Attribute 0x0032 100 100 --- Old_age Always
>- 0
>172 Unknown_Attribute 0x0032 100 100 --- Old_age Always
>- 0
>173 Unknown_Attribute 0x0032 100 100 --- Old_age Always
>- 1
>174 Unknown_Attribute 0x0032 100 100 --- Old_age Always
>- 29
>181 Program_Fail_Cnt_Total 0x0022 100 100 --- Old_age Always
>- 3199786025164
>183 Runtime_Bad_Block 0x0032 100 100 --- Old_age Always
>- 0
>184 End-to-End_Error 0x0032 100 100 --- Old_age Always
>- 0
>187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always
>- 0
>188 Command_Timeout 0x0032 100 100 --- Old_age Always
>- 113
>194 Temperature_Celsius 0x0022 057 049 --- Old_age Always
>- 43 (0 51 255 232 0)
>195 Hardware_ECC_Recovered 0x003a 100 100 --- Old_age Always
>- 4294967295
>196 Reallocated_Event_Count 0x0032 100 100 --- Old_age Always
>- 18
>197 Current_Pending_Sector 0x0032 100 100 --- Old_age Always
>- 0
>198 Offline_Uncorrectable 0x0030 100 100 --- Old_age Offline
>- 0
>199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always
>- 0
>202 Data_Address_Mark_Errs 0x0031 100 100 --- Pre-fail Offline
>- 0
>206 Flying_Height 0x000e 100 100 --- Old_age Always
>- 0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num Test_Description Status Remaining LifeTime(hours)
>LBA_of_first_error
># 1 Vendor (0xff) Completed without error 00% 3451 -
># 2 Vendor (0xff) Completed without error 00% 3169 -
># 3 Vendor (0xff) Completed without error 00% 3159 -
># 4 Vendor (0xff) Completed without error 00% 3145 -
># 5 Vendor (0xff) Completed without error 00% 3138 -
># 6 Vendor (0xff) Completed without error 00% 3124 -
># 7 Vendor (0xff) Completed without error 00% 3110 -
># 8 Vendor (0xff) Completed without error 00% 3096 -
># 9 Vendor (0xff) Completed without error 00% 3082 -
>#10 Vendor (0xff) Completed without error 00% 3068 -
>#11 Vendor (0xff) Completed without error 00% 3054 -
>#12 Vendor (0xff) Completed without error 00% 3040 -
>#13 Vendor (0xff) Completed without error 00% 3026 -
>#14 Vendor (0xff) Completed without error 00% 3011 -
>#15 Vendor (0xff) Completed without error 00% 2997 -
>#16 Vendor (0xff) Completed without error 00% 2983 -
>#17 Vendor (0xff) Completed without error 00% 2969 -
>#18 Vendor (0xff) Completed without error 00% 2954 -
>#19 Vendor (0xff) Completed without error 00% 2939 -
>#20 Vendor (0xff) Completed without error 00% 2925 -
>#21 Vendor (0xff) Completed without error 00% 2909 -
>
>SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
>Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>
>
>if it is necessary, it is ready to provide the demanded diagnostics
>
>--
>Regars,
> Evgeny
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
