Hello Bruce, the devices become all online, only at start of the devices in tcpip it hangs in status "starting". Therefore I get no error sense code, with which I could perhaps diagnose the problem. The chpid is dedicated to the lpar and, as I said, on os390 everything works fine. So there cannot be am error in hardware or something like that. Even the iodf is exactly the same as in os390. I have only copied the iodf to the iodf volume of z/os.
Regards Franz Josef Pohlen ----- Original Message ----- From: "Bruce Hewson" <[EMAIL PROTECTED]> Newsgroups: bit.listserv.ibm-main To: <IBM-MAIN@BAMA.UA.EDU> Sent: Saturday, May 14, 2005 11:28 AM Subject: Re: Problem with tcpip escon mpc connection to a windows server > Hello Franz Josef, > > I tried to imply that my ESCON attached PCs are not running SERVER code. > Actually they run a propietary program, but the ESCON card in the PC is not > part of that program. > > What exactly do you get as you bring the CHPID online to z/OS. > Does the path get validated. > Does the device come online. > > All this is even before you activate VTAM or IP device usage. > > Have you reviewed the logs on your pc. > > Do you only have one LPAR? > Is your CHPID dedicated to that LPAR or shared? > > In my case, when more than one path is oing to be used, the PATH does not > get validated and the device will not come online. > > Regards > Bruce Hewson > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
