Not sure about the z/9x0's, but for the z/890, you have to set up
an OAT table for the shared port/CHPID. Each OAT table entry
will have the IP address for each LPAR that will use the port/CHPID.
I currently have six LPARs sharing a single OSA port/CHPID. As
you can see from the table below, all of the LPARs can use the same CCUU.
*************************************************************************
Image 0.1 (LPAR001)
00(0620)* PASSTHRU 00 NO 10.11.18.11 S
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
Image 0.2 (LPAR002)
00(0620)* PASSTHRU 00 NO 10.2.0.7 S
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
Image 0.3 (LPAR003)
00(0620)* PASSTHRU 00 NO 10.2.0.3 SIU
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
Image 0.4 (LPAR004)
00(0620)* PASSTHRU 00 NO 10.2.0.2 SIU
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
Image 0.5 (LPAR005)
00(0620)* PASSTHRU 00 NO 10.2.0.5 S
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
Image 0.6 (LPAR006)
00(0620)* PASSTHRU 00 NO 10.2.0.6 SIU
ALL
04(0624) N/A N/A
CSS
05(0625) N/A N/A
CSS
*************************************************************************
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
