Thanks Gil, I have found all the stuff you mention. Its just whatever I choose for Domain Index and/or PCI candidate lists, itsays that the combination is already in use.
Crispin Hugo Systems Programmer, Macro 4 <http://www.macro4.com/> Macro 4 plc, The Orangery, Turners Hill Road, Worth, Crawley, RH10 4SS Direct Line: +44 (0)1293 872121 Switchboard: +44 (0) 1293 872000 Fax: +44 (0) 1293 872001 This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. This message is provided for informational purposes and should not be construed as a solicitation, offer or acceptance of any offer. -----Original Message----- From: Gil Peleg [mailto:[EMAIL PROTECTED] Sent: 19 June 2005 12:21 To: IBM-MAIN@BAMA.UA.EDU Subject: Re: LPAR Configuration on z/890 I imagine it is indeed your intent to work with the Cryptographic coprocessor, or you wouldnt have been licensed to use them(?). What you need to do is to assign a different usage domain index(es) to each LPAR. To do this, enter the Customize/Delete Activation Profiles dialog (Its under the CPC Operational Customization tab in the HMC). Then select the CPC's reset profile. >From there, For every LPAR in the profile: Change to the PCI Crypto tab (you should see it among the tabs in the buttom of the window, if you dont see it - click the small right arrow, that is to the right of the tabs, and then you should seen it). On the PCI Crypto tab you will have the chance to select the Usage domain index and Control doman index for the LPAR. For starters, select a different Usage domain index for each LPAR. You can also indicate that the LPAR should not use any cryptographic functions. Gil. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ________________________________________________________________________ This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 plc internal virus protection system. ________________________________________________________________________ ________________________________________________________________________ This email has been scanned for all known viruses by the MessageLabs Email Security Service and the Macro 4 plc internal virus protection system. ________________________________________________________________________ ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
