Hi Salah You can verify the type and speed of your FICON-channels thru RMF. Take a look at RMF Monitor III and select the resource "channel" (Option 12). The type is shown in the "G" column right to the CHPID.
Type (G=)1: FICON Express at 1Gbit/sec Type 2: FICON Express at 2Gbit/sec Type 3: FICON Express2 at 1 Gbit/sec Type 4: FICON Express2 at 2 Gbit/sec Below is a screenshot from our type 2 FICON-Chpids. Channel Path Utilization(%) Read(B/s) Write(B/s) MSG MSG Send Recv ID No G Type S Part Tot Bus Part Tot Part Tot Rate Size Fail Fail 01 2 FC_S Y 0.6 6.4 9.6 619K 6M 26K 1M 02 2 FC_S Y 0.8 1.6 5.5 0 0 30K 128K 03 2 FC_S Y 0.7 6.5 9.7 630K 6M 25K 1M 06 2 FC_S Y 0.6 1.2 5.5 0 0 31K 133K Hth Cheers Tom Thomas Ramseier Bundesamt für Informatik und Telekommunikation BIT Betriebszentrum / Bereitstellung / Host Informationssystem-Architekt Monbijoustrasse 74 CH-3003 Bern Tel. +41 (0)31 323 01 00 Fax +41 (0)31 325 90 30 [EMAIL PROTECTED] www.bit.admin.ch Der Eisbrecher: Die Kundenzeitung des BIT www.bit.admin.ch/eisbrecher -----Ursprüngliche Nachricht----- Von: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Im Auftrag von Peter Pfaffner Gesendet: Mittwoch, 10. August 2005 21:23 An: IBM-MAIN@BAMA.UA.EDU Betreff: FICON Express2 >Salah Balboul wrote: >How can you tell if the FICON Express2 is operating at 2Gbit/Sec speed? >They are connected to a 2105 device type. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html