There's the IODF and the IOCDS. Perhaps you've changed one but not the other. You should see an 'out of sync' message on the activate panel.
Yes, all is doable dynamically these days. Even so, a deactivate and activate sequence for an LPAR is almost the same as a POR. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Jeffrey Deaver Sent: Tuesday, October 13, 2009 3:00 PM To: [email protected] Subject: IODF Change... I have an IODF which has a mistake in it in regards to some new storage we've attached... CNTLUNIT CUNUMBR=5000,PATH=((CSS(0),B3,B2,82,83,40,41,D0,D1)),* UNITADD=((00,256)),CUADD=0,UNIT=2107 IODEVICE ADDRESS=(5000,228),CUNUMBR=(5000),STADET=Y,UNIT=3390B IODEVICE ADDRESS=(50E4,028),CUNUMBR=(5000),STADET=Y,UNIT=3390A The CUADD statements have the wrong value. They should be CUADD=50 etc instead of CUADD=0 etc. I altered the IODF and IPL'ed my test system, but the change has not taken. In other words, I still can't access the storage.... >From an init job... ICK30713I UNABLE TO ALLOCATE UCB, RC=0008, RSN=0004 FROM IOSODS ICK31024I UNABLE TO OPEN VOLUME. ICK30003I FUNCTION TERMINATED. CONDITION CODE IS 12 12:26:00 10/13/09 I can't vary the paths online... IEE386I PATH(5001,40) NOT BROUGHT ONLINE IEE763I NAME= IECVIOPM CODE= 0000000400000000 IOS552I PATH NOT PHYSICALLY AVAILABLE IEE764I END OF IEE386I RELATED MESSAGES Assuming I'm not missing some other configuration issue, I should be able to change the IODF, IPL that LPAR and have the change take effect, right? No POR necessary, right? What am I missing? Thanks. Jeffrey Deaver, Engineer Systems Engineering [email protected] 651-665-4231(v) IS - "Creating competitive advantage with technology. Providing service that excels." OSS - " Where Innovation Happens" ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
