I did find the list in the Ref Guide. Only &SYSPLEX and &SYSNAME are available, besides the SMS provided symbols.
Thanks, Dave _________________________________________________________________ Dave Jousma Assistant Vice President, Mainframe Services david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB1G p 616.653.8429 f 616.653.8497 -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of John Kington Sent: Thursday, December 03, 2009 9:22 AM To: IBM-MAIN@bama.ua.edu Subject: Re: SMS ACS and symbols Dave, >Are system or installation defined system symbols other than &SYSPLEX or >&SYSNAME available for use in ACS routines? Looking at the manuals, it >is not clear. I think godzilla only gives you what is documented in the Storage Administration Reference. You can easily test this out by trying to use a locally defined symbolic in a IF statement in one of the ACS routines and try to translate it. Regards, John This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html