This change from OS2 to Linux was part of z9 and has been propagated to z10. Theres even a short description of this evolution at Wikepedia (http://en.wikipedia.org/wiki/IBM_System_z9).
There are some considerations for HMC Remote Operations. Try looking at the following: Appendix C of the Hardware Management Console Operations Guide (SC28- 6873-00) https://www- 304.ibm.com/servers/resourcelink/lib03010.nsf/DF559B0D8BE29E5685257481006 03BC2/$File/SC28-6873-00.pdf or Remote Operation section of the IBM System z9 Enterprise Class Technical Guide Redbook (SG24-7124-02) http://www.redbooks.ibm.com/redbooks/pdfs/sg247124.pdf You should be able to achieve what you need, its just a different way of doing things. On Sun, 13 Dec 2009 09:11:25 -0800, Ed Long <[email protected]> wrote: >Happy Holidays to one and all. > >So, we have a new z/10 BC which replaced a z890 and will also soon replace a 7060. > > >Being a small ISV we have limited system programming and no operator staff. We use the HMC as our console; on the old OS2 systems, PCOMM did an adequate job of allowing us to see the console when the HMC was remoted. > >Not so on the linux x3270 based z10. The 3270 emulation sessions don't appear when we remote the HMC console. Is there a configuration setting we missed or is this simply a feature? > >Thanks for your help.. >Edward Long ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
